Shareware Universe - The Gold Collection

home *** CD-ROM | disk | FTP | other *** search

/ Shareware Universe - The Gold Collection / Shareware Universe The Gold Collection.iso / hobbies / oygarden / oyc-doc.exe / OYC.DOC < prev next >

Wrap

Text File | 1992-03-23 | 210KB | 4,718 lines

ORGANIZE YOUR PLANTS, YARD OR GARDEN A Complete Database For Cataloging Plants H.C.P. Services, Inc. HomeCraft Software P.O. Box 974 Tualatin, OR 97062 _______ ____|__ | (tm) --| | |------------------- | ____|__ | Association of | | |_| Shareware |__| o | Professionals -----| | |--------------------- |___|___| MEMBER This manual and accompanying software copyright 1991, 1992 H.C.P. Services, Inc. Portions Copyright 1985, 1986, 1987, 1988 Microsoft Corporation WELCOME TO SHAREWARE This software is distributed as shareware. This means you can try this software and find out whether it provides what you need before you pay for it. There are no limits in this software nor is it crippled in any way. It is true "try before you buy" software. You may have obtained this software from a shareware disk vendor, a bulletin board or a friend. I hope you also feel free to share copies of it with your friends and upload it to your favorite bulletin board(s). If you find you like this software and you've been using it for more than 60 days, you need to purchase a registered copy. We also know that nothing is perfect for everyone, so if you find this software does not meet your needs, please let us know what changes or additions you'd like. Registration Information This is a copyrighted software program protected by both U.S. and international copyright law. If you are using this software for more than 60 days you must purchase a registered copy in order to continue to use it. The registration for a single copy is $79.95 (plus $4.00 S&H - $8.00 outside North America). Please note that even though you may have purchased this disk from a retail store or via mail order, you have not purchased a registered copy. What you've paid for this disk was a fee that compensates the vendor for their costs, time and effort in making this disk available. Introductory special - if you register before December 31, 1992 you can save $20.00. During 1992 shareware users may register this software for just $59.95 (plus $4.00 S&H - $8.00 for shipments outside North America). We accept VISA and Master Card. All amounts shown are in U.S. dollars. All checks in U.S. dollars must be drawn on a U.S. bank. We accept personal checks for registration payments in your local currency from users in Canada, Mexico, Australia, the United Kingdom, New Zealand, Sweden, Norway, France, Germany, Denmark, The Netherlands, Japan and Switzerland. We will add other countries as our bank allows. When you register you will receive: [] The current version of this software. We are constantly making improvements and adding features suggested by users. We do not duplicate your disk until just before we ship the registered version of your software, thus you get the very latest version. [] A copy of the illustrated, printed and bound manual with quick reference card. [] Free unlimited technical support via telephone, fax, mail or electronic mail. [] A free subscription to our newsletter which includes user tips, help with using your computer, information about low cost upgrades and special shareware disk offers. [] Depending on which program you are registering, a free disk with pre-entered data may be available. (See appendix B for more information about the availability of pre-entered data). [] A free bonus shareware disk. [] A utility that allows you to use data you've entered using a previous version of one of HomeCraft's specialized database programs for collectors. MULTIPLE COMPUTERS AND NETWORKS If you wish to use this software on a network or simultaneously on more than one computer (eg. a computer at home and another computer at work or in the office of a charity), you will need a site license. Please see appendix E for information on site licenses. DISTRIBUTION OF THE SHAREWARE VERSION OF THIS SOFTWARE (Please see the VENDOR.DOC file). Please feel free to give away copies of the shareware version of this software to friends, relatives, acquaintances or even strangers. You may NOT sell copies of this software, even if the purchase price is just to cover duplication costs; nor may you include this shareware on a CD-ROM or other type of package produced by any user group, commercial library, or any for profit or non- profit organization; nor may you distribute it with any other product or as an incentive to purchase any other product, without the express written permission of H.C.P. Services, Inc. The purpose of this is so that we will know who you are and we can then keep you supplied with updates. The only exception to this is that ASP approved disk vendors (except for PsL) may sell this software without prior approval. OUR GUARANTEE If you have any problems with this program or the disk it is on, without regard to where you obtained it, you may send it to H.C.P. Services, Inc. (HomeCraft Software) for a free update to the current version. SPECIALTY DATABASE U S E R L I C E N S E A G R E E M E N T NOTICE! - This manual and the enclosed software is provided to you on the express condition that you agree to this software license. By using this software you agree to the following provisions. <1> This manual, the enclosed software and the disks on which it is contained are licensed to you, for your own use only. This is copyrighted software. You are not obtaining title to the software or any copyright rights. You may not sublicense, rent, lease, modify, translate, convert to another programming language, decompile, or disassemble the software for any purpose. <2> You may make as many copies of this software as you need for backup purposes and copies may be given away provided no fee is charged. Private individuals may use this software on more than one computer, provided there is no chance it will be used simultaneously on more than one computer. This software may not be used on more than one computer, nor installed on more than one hard disk, nor installed on a network when used by a business, corporation, government agency or department, or institution of any kind. If you need to install this software on more than one computer or on a network, please contact us for information about a site license. WARRANTY - HCP SERVICES INC. DISCLAIMS ALL WARRANTIES RELATING TO THIS SOFTWARE, WHETHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, AND ALL SUCH WARRANTIES ARE EXPRESSLY AND SPECIFICALLY DISCLAIMED. NEITHER HCP SERVICES, INC. NOR ANYONE ELSE WHO HAS BEEN INVOLVED IN THE CREATION, PRODUCTION, OR DELIVERY OF THIS SOFTWARE SHALL BE LIABLE FOR ANY INDIRECT, CONSEQUENTIAL, OR INCIDENTAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE SUCH SOFTWARE EVEN IF HCP SERVICES, INC. HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR CLAIMS. IN NO EVENT SHALL HCP SERVICES, INC.'s LIABILITY FOR ANY DAMAGES EVER EXCEED THE PRICE PAID FOR THE LICENSE TO USE THE SOFTWARE, REGARDLESS OF THE FORM OF CLAIM. THE PERSON USING THE SOFTWARE BEARS ALL RISK AS TO THE QUALITY AND PERFORMANCE OF THE SOFTWARE. Some states do not allow the exclusion of the limit of liability for consequential or incidental damages, so the above limitation may not apply to you. This agreement shall be governed by the laws of the State of Oregon and shall inure to the benefit of HCP Services, Inc. and any successors, administrators, heirs and assigns. Any action or proceeding brought by either party against the other arising out of or related to this agreement shall be brought only in a STATE or FEDERAL COURT of competent jurisdiction located in Multnomah County, Oregon. The parties hereby consent to in personam jurisdiction of said courts." Information in this manual is subject to change without notice and does not represent a commitment on the part of H.C.P. Services, Inc. or HomeCraft Software. This manual and accompanying software is copyrighted and protected under both Federal Law and the Berne Convention (international law). This manual is copyright 1991 & 1992 by H.C.P. Services, Inc. All Rights Reserved WordPerfect is a trademark of WordPerfect Corporation IBM is a trademark of International Business Machines Microsoft and MS-DOS are trademarks of Microsoft Corporation dBase III is a trademark of Ashton-Tate Organize! is a trademark of H.C.P. Services, Inc. Part number: 001-002M This program is produced by a member of the Association of Shareware Professionals (ASP). ASP wants to make sure that the shareware principle works for you. If you are unable to resolve a shareware-related problem with an ASP member by contacting the member directly, ASP may be able to help. The ASP Ombudsman can help you resolve a dispute or problem with an ASP member, but does not provide technical support for members' products. Please write to the ASP Ombudsman at 545 Grover Road, Muskegon, MI 49442-9427 or send a Compuserve message via CompuServe Mail to ASP Ombudsman 70007,3536 H.C.P. Services, Inc. HomeCraft Software P.O. Box 974 Tualatin, OR 97062 (503) 692-3732 (503) 692-0382 (FAX) TABLE OF CONTENTS SECTION ONE - INTRODUCTION 1 Terminology 2 Using This Manual 3 Technical Support 4 SECTION TWO - INSTALLATION 6 SECTION THREE - QUICK START 9 Starting The Software 9 Using The Menus 10 Make A New Entry 11 Editing 12 Searching And Printed Reports 13 Printed Reports 15 Utilities 16 SECTION FOUR - REFERENCE SECTION (USING ORGANIZE!) 20 The Main Screen 20 Memos 22 The Menus 23 Make Entries Menu 23 Edit Menu 25 Search Menu 27 List All Entries 27 Sequential Searches 28 Alphabetical Searches 29 Global Searches 31 Utilities Menu 33 Copy Entries 33 Import dBase File 36 Reindex 37 Sorting 38 Set Up New Format 42 Set Up Macro 45 Set Security Code 46 Delete File 47 Select Filename 48 Report Menu 48 Send (Report) To 48 Page Length 50 Set Up Report Format 51 Printing Reports 53 Exit Menu 54 Backing Up Your Catalog 54 Help Menu 56 Return (Menu Selection) 56 SECTION FIVE - YOUR COLLECTION 57 APPENDIX A - OTHER SOFTWARE 61 APPENDIX B - PROBLEM SOLVING 64 APPENDIX C - FILES USED BY ORGANIZE! 67 APPENDIX D - USING DOS 70 APPENDIX E - SITE LICENSES 76 INDEX 79 ______________________ORGANIZE YOUR COLLECTION - INTRODUCTION - 1 SECTION ONE - INTRODUCTION HomeCraft's ORGANIZE YOUR COLLECTION is an easy-to-use database/cataloging program designed specifically for your collection. It will automatically catalog and alphabetize information about your collection as you enter it and you can search for or cross reference any of the information you've entered on any line. This software was developed as an extension of HomeCraft's collector's series of software. Since 1986 HomeCraft has been recognized internationally as the leading publisher of software for cataloging collectibles such as records and CDs, business cards and books. Here's what the press has said about our software: "menu driven and easy" - PC Magazine "Helping the insatiable collector stay organized." - Business Week "The best are available from HomeCraft." - Jerry Osborn writing in his nationally syndicated newspaper column. "first class support is what separates FOR RECORD/CD COLLECTORS from the rest of the pack." - review in Goldmine magazine in which our software was rated the best available for cataloging a record/CD collection. This is version 5 in our series of specialized databases. With this program we are introducing a much more powerful and flexible version than any previous program we've produced. However, it still maintains the easy-to-use interface and the clear screen displays that have become a HomeCraft trademark. Unlike previous versions you now have the flexibility to choose the specific lines (fields) you want to use. You can design your own report formats. Alphabetize any line and sort any combination of lines into a multiple level alphabetical listing. A Quick View screen lets you see 20 entries at one time. Macros and copy functions make entering information about your collection quicker and easier. ______________________ORGANIZE YOUR COLLECTION - INTRODUCTION - 2 USING EXISTING DATA FILES If you have your collection cataloged using a database program such as dBase, this software will directly import your files if they are in a dBase III format. If you've been using any of HomeCraft's previous programs for collectors, you can convert your existing files for use with this software. One standard we maintain at HomeCraft, above all else, is that we will never make a change in our software that results in your having to retype all of your entries. I have several collections that involve 30 to 40 thousand entries and I do not want to ever have to retype them. So I understand how you feel and I promise that once you start using a HomeCraft specialty database, you will never need to retype your data again. If we do need to change the data format, all registered users of the new version will be supplied with a free conversion utility. If you currently have files created by a previous version of our software, you will be able to convert them using the free automatic conversion utility supplied with the registered version of this software. TERMINOLOGY Throughout this manual we will be using a few standard computer terms you should be familiar with. I've tried to write this manual using plain English, but since we are talking about using a computer we will need to use a few computer terms. DATABASE - the "catalog" created by this software is called a database. A database is a collection of information. Software such as ORGANIZE YOUR COLLECTION can search, print, list and manipulate the information in a database and is thus referred to as database software. FLOPPY DISK - any software you purchase is supplied on a floppy disk. Floppy disks come in two sizes - 5-1/4 inch square and 3- 1/2 inch square. Although 5-1/4" disks are flexible (floppy) 3- 1/2" disks are made from rigid plastic. Thus the term "floppy disk" is not an accurate descriptive term. Floppy disks can typically contain from 0.360 mb to 1.44 mb of information. Floppy disk drives are usually designated as A and B. HARD DISK - a hard disk is installed inside your computer and can not typically be removed. Hard disks operate much faster and hold a lot more information than a floppy disk. Typical hard ______________________ORGANIZE YOUR COLLECTION - INTRODUCTION - 3 disks can hold from 40 mb to 100 mb (and more). Hard disk drives are designated by the letter C or greater. Hard disks are never designated as drive A or B. Not all computers have hard disks. The speed of database software is highly dependent on the speed of the disk containing the data. Thus I recommend that your ORGANIZE! database be stored on a hard disk. mb - this is an abbreviation for megabyte which is a measure of how much information can be stored on a disk. Typically a 40 mb hard disk is sufficient for most database files created by ORGANIZE! DIRECTORY/SUB-DIRECTORY - your computer can create separate "rooms" on disks. Each "room" is separate from the others and is called a directory. (Sub directories are "rooms" within the main directory "room"). Directories and sub-directories provide a way to keep the files on your disks organized. You should create a separate directory for each program you use. This will keep all of the files associated with that program together in one place and prevent them from becoming mixed with (and thus confused with) files used by other programs. See Appendix E for more information about directories. FILE and FILENAME - a computer stores information and programs in "files" on either a floppy disk or a hard disk. Each file has a name that is called its filename. A filename may have up to eight characters followed by a period and then a three letter filename extension. The name of the ORGANIZE! program file is OYC.EXE. "EXE" is the filename extension and "OYC" is the filename. By the way, OYC stands for Organize Your Collection. USING THIS MANUAL This manual is divided into five sections plus appendixes. Part one is the section you are now reading and it contains the introductory information. Part two describes how to install this software on your computer. The third section provides quick start instructions. Please read this section before starting to use this software. It is short and has been designed to provide the key information needed to get you quickly started using the basic functions provided by this software. ______________________ORGANIZE YOUR COLLECTION - INTRODUCTION - 4 The fourth section is a reference section that describes in detail all of the features in this software. Section five provides the details about the various collector's database formats provided with this copy of this software No computer experience is required to use this software, however you will need to know which letter designates each disk drive on your computer. For example, a hard disk is usually drive C and floppy disks are drives A and B. Check your computer's manual for the letters used to designate the drives on your computer. NOTE: Please check the README.TXT file for information about changes to the software since the manual was printed. To get a printed copy of the README.TXT file do the following: 1) Get the DOS prompt for the disk containing the README.TXT file. 2) Type COPY README.TXT LPT1: and push enter. SYSTEM REQUIREMENTS: this software will only run on computers that are fully IBM compatible and have at least 320K of memory available. A color monitor is required for some of the features. A hard disk is recommended, but this software will run on floppy disks provided there is a minimum of 720K of disk space available. If you have a hard disk, please put this software on your hard disk and store your database files on the hard disk. Database software such as this software is very disk intensive. Because of the slow speed of floppy disks using the software on a floppy disk will slow it down considerably. TECHNICAL SUPPORT: If you have problems using this software, please read this manual first. Appendix B provides a trouble shooting guide that may be helpful in solving problems. If you are unable to solve the problem by reading the manual, feel free to give us a call. We do provide limited basic technical support for unregistered users (full support is available for registered users only). The number is (503) 692-3732. Technical support is available from 8am till 5pm pacific time monday through friday. You may also contact us by writing to us at: HomeCraft P.O. Box 974 Tualatin, OR 97062 ______________________ORGANIZE YOUR COLLECTION - INTRODUCTION - 5 MAKE BACK UP COPIES The most important suggestion I can pass on to you is to make back up copies of your data files (the ones that end with DAT). If you have a hard disk I recommend using software such as FastBack or PC Tools. You also could use the DOS back up utilities, but personally I don't use them. I've heard of too many problems with the DOS backup utilities. Problems such as only being able to restore lost files onto a similar computer using the same version of DOS. (That may not always be possible). For something as critical as making backup copies I prefer software that will backup and restore from and to any hard disk using any version of DOS on any computer. This version does include a backup utility. This utility will backup files that are approximately up to 1.3 megabytes big using a 360K floppy disk (larger files can be backed up using higher capacity floppy disks). This utility is provided in order to insure you have something you can use to backup up your data. However, this utility is not intended as a permanent solution. First, it is limited in that once your catalog exceeds the size that can be backed-up on a single floppy this utility will no longer be able to back it up. Second, it provides no tracking of the files that have been backed up. Unless you carefully label your backup disks you can lose track of what files are on which disks. ______________________ORGANIZE YOUR COLLECTION - INSTALLATION - 6 SECTION TWO - INSTALLATION Installation of this software is straight forward. First make a backup copy of this disk. You'll need to check the manuals that came with your computer to see how to make copies of a disk. Generally you would use the DOS DISKCOPY utility to copy a floppy disk. The commands you need to type to use DISKCOPY vary depending on the version of DOS you have and the floppy disk configuration in your computer. If you should damage or lose your only copy of this software, you can get another shareware disk from HomeCraft by sending us a blank floppy disk plus 50 cents for the return postage. (Outside the U.S. please include $2.00 US, or the equivalent in your currency, for air mail postage). There are three disk configurations for which this software can be installed. Hard Disk Installation To install on a hard disk: ° Put the backup copy of the floppy disk in a floppy drive. ° Get the DOS prompt on the screen and change it so that it is set for the disk drive that contains the this software floppy disk. For example, if the floppy disk is in the "A" drive and your computer has a "C>" prompt on the screen, type A: and push ENTER. You can change the DOS prompt so it is set for a different drive by typing the letter representing the drive you want to use, a colon, and then pushing ENTER. (See Appendix E for help with using DOS). ° Type INSTALL and follow the instructions that appear on the screen. NOTE: The installation process will supply a default directory name. However, if you are using several different versions of this software to catalog different types of collections, be sure to install each version in a different directory. You might possibly want to name the directories so they reflect the type of collection being cataloged. ______________________ORGANIZE YOUR COLLECTION - INSTALLATION - 7 Single Drive Floppy Disk Installation If your computer only has a single floppy drive you will have to install the software manually. The easiest way might be to make a complete copy of the this software floppy disk and then delete the files you don't need. Please note that this software can not be used on a computer with single 360K floppy drive and no hard disk. If you have a single floppy drive it must have a capacity of at least a 720K. Most of the files you'll see on the disk are data (DAT) or set (SET) files. These are the formats for the various types of collections. The names of these files indicate the type of collection they are used with. You can erase any DAT and SET files that are used for collections you are not interested in cataloging. Next you'll need to de-archive the main set of files. To do this type LHA E ORGANIZE and push ENTER. Once all of the files have been de-archived you can erase the ORGANIZE.LZH file. The disk is now ready to use. If you have a computer with a hard disk and wish to use this software on a second computer that does not have a hard disk, the easiest way to install this software on a floppy disk is to first install it on the hard disk. Then copy all of the files from the hard disk to the floppy disk you want to use with your second computer. NOTE: This software may only be used on two computers if there is no chance that it can be used simultaneously on both computers. Please see the user license at the front of this manual. Dual Floppy Drive Installation If your computer has two floppy drives you can install this software just as if one of the floppy drives is a hard disk. First put the backup copy of the enclosed disk in the "A" drive. Put a blank formatted disk in the "B" drive. At the "A>" prompt type INSTALL and follow the directions that appear on the screen. In this case the drive you want to install the software on is the "B" drive so the required files will be copied to the blank disk. When the installation asks for the name of a directory, a default name of \OYC will be shown. Type a backslash "\" and then push the DEL key until only the backslash remains. This will install the software in the root directory on the floppy disk. ______________________ORGANIZE YOUR COLLECTION - INSTALLATION - 8 CONFIG.SYS File Your computer uses a CONFIG.SYS file to tell it how to configure itself when it is first turned on. The CONFIG.SYS file is an ASCII text file that contains a series of instructions used by your computer. For this software to run these instructions must tell your computer to set itself up so up to 20 files may be opened at the same time. This is done by including a FILES=20 (or any number greater than 20) statement in the CONFIG.SYS file. If you are running a Graphical User Interface such as Windows, your computer may need to be set to open as many as 50 or 60 files. The CONFIG.SYS file needs to be in the root directory on your hard disk. If you use a floppy disk to boot your computer, the CONFIG.SYS file must be on the floppy disk used to boot your computer. The CONFIG.SYS file is not part of the this software. You can look at the contents of a CONFIG.SYS file by going to the root directory on your hard disk and typing: TYPE CONFIG.SYS at the DOS prompt. Then push ENTER. You can change a CONFIG.SYS file by using your word processing software, editing it as you would any other document and then saving it as a DOS text file (ASCII file). If you do not have a CONFIG.SYS file, or if it does not include a FILES=20 line, you can create one during the installation process. When you run the INSTALL utility you will be given a chance to install a CONFIG.SYS file with a FILES=20 line. This will not change any of the other lines in your CONFIG.SYS file. _______________________ORGANIZE YOUR COLLECTION - QUICK START - 9 SECTION THREE - QUICK START STARTING THE SOFTWARE As you read through this section I recommend you have the software installed and running on your computer. As I describe examples duplicate the steps I'm describing on your computer. This will take you step-by-step through all the main functions in the software. The Quick Start section does not describe all of the functions available, just those you need in order to use the basic capabilities of the software. For explanations of all of the functions and features in this software you will need to read the reference section of this manual. To start this software type OYC at the DOS prompt and push ENTER. If you are using this software on a hard disk, you will need to be in the directory or subdirectory in which the software was installed before you type OYC. If when your computer first starts it displays the DOS prompt, type CD \ and the name of the directory in which this software was installed. If you used the default directory name of OYC supplied by the installation software, you would type: CD \OYC The letters "CD" stand for Change Directory. Typing CD \OYC will put you in the OYC directory. Once in the OYC directory you can type OYC to start the software. User Tip (This is not required in order to use the this software. It is only provided to help make using your computer easier). Some computer "experts" suggest you include the directory name for all your major programs in the PATH statement contained in the AUTOEXEC.BAT file. This allows you to start the program from any directory. I'd like to offer another suggestion. Include a directory called BATCH in your path statement. In the BATCH directory put batch files that first change to the directory containing the program they run and then run that program. If this software is on the "C" drive, the batch file for this software would look like: ______________________ORGANIZE YOUR COLLECTION - QUICK START - 10 C: CD \OYC OYC You also can use this technique with other programs such as WordPerfect. The batch file that starts WordPerfect might look like: C: CD \WP51 WP %1 The %1 symbol allows WordPerfect (or any other program) to use a parameter. For example, if you start WordPerfect by typing WP WORK.DOC, WordPerfect will run and automatically load the WORK.DOC document. When used this way WORK.DOC is called a parameter. THE MAIN SCREEN After typing OYC (and pushing ENTER) the software will start running and display the complete cataloging format for your collection. Throughout this manual I will refer to this initial screen as the "Main Screen." These are the key parts of the Main Screen are the top two lines and the bottom line. They provide status information and menu selections. The majority of the screen is used to display the information lines (fields) in use. When the software first starts the Main Screen is displayed. You can return to the Main Screen from any other function such as editing, searching or making new entries, by pushing F7. The F7 key is used to clear the screen and reset everything back to their default settings. With the Main Screen displayed you can immediately start typing and saving new entries. But, before getting started let's go over how to use the drop-down menus. This software provides drop-down menus that show you, at a glance, all of your options. The names of the menus are displayed across the top of the screen. They are: Make entries, Edit, Search, Utilities, Reports, eXit and Help. Using The Menus To select a menu hold down the ALT key and push the capitalized letter included as a part of the name of the menu you want to display. To start let's look at the Make entries menu. Hold down the ALT key and push the letter M. You'll see the screen shown in figure three. ______________________ORGANIZE YOUR COLLECTION - QUICK START - 11 Once any of the drop-down menus has been displayed you can move from one menu to another by using the left and right cursor keys. Take a look at the other menus by pushing the right cursor key until the Make entries menu is displayed again. A scroll bar within each drop-down menu is used to select the function you want to use. The scroll bar is moved using the up and down cursor keys. When the scroll bar is at the top of the menu it can be directly moved to the bottom selection by pushing the up cursor key once. It can also be move from the bottom selection directly to the top by pushing the down cursor key. Some of the functions can be used directly without going through a menu. These have an "F key" designation next to them when the menu is displayed. Looking at the Make entries menu you'll see "<F5>" next to the word "Save". This means you can push F5 to save an entry without using the drop-down menu. To select an item on a menu first highlight it with the scroll bar and then push the ENTER key. For example, to exit from the program push the right cursor key until the "eXit" drop-down menu appears, then highlight "Exit Program" and push ENTER. (If you just exited from the software type OYC and push ENTER to get started again). By the way, you should never turn your computer off while a program (any program, except for a shell or menu program) is running. Always exit from the software before turning your computer off. If you do not want to make a selection from a menu you can return to the main screen from the drop-down menus by pushing the ESC key. You can also select "Return" on the menu bar at the top of the screen. If a drop-down menu is displayed push ESC to return to the main screen. Now let's try typing and saving an entry. MAKING NEW ENTRIES When you pushed ESC the drop-down menus should have disappeared and the cursor will be in the left hand space on the LAST NAME line. The names of the lines are listed along the left side of the screen. To the right of each name is a shaded area that shows the space available for entering information related to the line name. The cursor can be moved around in the shaded area using ______________________ORGANIZE YOUR COLLECTION - QUICK START - 12 the four cursor keys. Whenever the cursor is at the beginning or end of a line, and can go no further, your computer will beep. To enter the information you want to catalog, just type it on the appropriate line. Start by typing information about the first item in your collection (you can make up something, this is only an example) on the top line. Then push ENTER. Pushing ENTER moves the cursor down to the first character of the next line. NOTE: The cataloging format as it appears on your screen may not be the format you want to use. You can eliminate unused lines, add 15 additional lines, and change the titles of most lines. We'll be discussing how to do that shortly. Then enter whatever else you want on the other lines and for this example enter CD001.92 on the CATALOG NUMBER line. You may change anything you've typed by using the cursor keys to put the cursor at the spot where you want to make a correction and then typing the new information. When the entry is complete and correct push ALT-M. The "Save" option will already be highlighted so all you need to do next is push ENTER and the entry will be saved. Pushing ENTER to select "Save" from the drop-down menu will clear the screen and leave it ready for the next entry to be typed. Notice that the entry number is displayed in the upper right hand corner. It should now say "Entry 2" as the next entry you type will be number 2. Now type in your second entry. To save this entry push F5. The F5 key provides a short cut for saving entries. Push ALT-M and notice that the word "Save" has "<F5>" next to it. This means pushing F5 performs the same function as selecting "Save" on the drop-down menu. That's it. That's all there is to entering information into your catalog. Push ESC to clear the drop-down menu from the screen. EDITING Now let's see if the information you just typed is really stored in the database. An editor is provided that lets you look at any entry and browse forward and backward through all of your entries. To use the editor push ALT-E. The "Select Number" ______________________ORGANIZE YOUR COLLECTION - QUICK START - 13 option will be highlighted as shown in figure five. Push the ENTER key and a window will appear asking you to type an entry number. Push number 1 and then push ENTER. The first entry will be displayed. You can now do any of several things. - You can modify this entry by moving the cursor to the word(s) to be modified and typing the changes. When the changes are complete push ALT-E and move the scroll bar to "Save Changes." Then push the ENTER key to save the changes you just made. Also notice that you can push F5 to save the changes without using the drop-down menu. - The editor also offers a browse capability. If the drop-down menu is on the screen, push ESC to return to the editing screen. To browse use the F1 and F2 keys to move backward and forward through the mailing list. Push F2 now. Then push F1 to go back to the previous entry. That's about all you can do with just two entries. Once you have more entries this becomes an easy way to page through all of them. The drop-down menus always show all of the options available to you. Push ALT-E. Notice that Page Backward and Page Forward are identified as being operated by the F1 and F2 keys. You can browse by selecting Page Forward or Page Backward from this drop- down menu or by pushing F1 or F2. - When an entry is no longer needed it can be deleted using the Edit menu. Push the right cursor key and we'll look at the search capabilities of Organize Your Collection. SEARCHING AND PRINTED REPORTS Two types of "searches" are provided by this software. The first is a listing. There are two types of listings. These are shown in the top box of the Search menu shown in figure six. They are: List Entries: allows you to enter a starting and ending entry number and have all of the entries between (and including) the two numbers listed in sequence. List Alphabetically: allows you to list entries in alphabetical or numerical order. To use this function you need to be using the indexes. ______________________ORGANIZE YOUR COLLECTION - QUICK START - 14 The second box down from the top on the Search menu lists the various types of searches you can do. Let's take a look at how these work. Push ESC to clear the drop-down menu from the screen then push F7 to clear the screen. (F7 is identified on the Make entries menu as the key that erases the screen). Sequential Searches To search for something first enter the information you want to find on the appropriate line. For example, let's search for a specific catalog number. Move the cursor to the CATALOG NUMBER line. Let's say you wanted to find catalog numbers that start with "CD". You would first type CD at the left edge of the CATALOG NUMBER line. Push ALT-S to drop-down the Search menu. Move the scroll bar to the "Sequential Search" selection and push the ENTER key. Normally, the first matching entry will be displayed, but in this case the software will say "NO MATCHES FOUND" because there is no entry with the catalog number. If you want to search for CD again push ALT-S and move the scroll bar to "Search Again" and push ENTER. If you do this you will get a "NO OTHER MATCHES FOUND" message at the bottom of the screen unless you happened to have entered CD on the CATALOG NUMBER line of the second entry. Sequential searches will find the specified search criteria, which in this case is CD on the CATALOG NUMBER line, without regard to where it is located on the line. The word (or phrase) you are searching for can even be within another word. There are short cut keys you can use for starting a sequential search. Push ALT-S to display the Search menu. Notice that sequential searches can be started by pushing F8. Also notice that you can find additional matches (Search Again) by pushing F2. When a match is found during a search it is displayed on the screen and the software automatically goes into the edit mode. You can make any changes or additions you want and then push F5 to save them. Other types of searches are shown on the Search menu (figure six). The "Alphabetical Search" will list entries alphabetically based on the search criteria and using indexes created by the software. The "Find Deleted" search will list all of the entries that have been deleted and the "Global Search" finds a word or phrase regardless of what field it is in. ______________________ORGANIZE YOUR COLLECTION - QUICK START - 15 Printed Reports NOTE: For more detailed information on how to print reports see the section on the Report Menu in Section Four of this manual. The search you just conducted displayed matching entries on the screen. You can also print reports or save them in disk files. If the Search menu is still on the screen push the right cursor key twice to display the Reports menu. The first selection on this menu is called "Send To" and it is currently set for MONITOR. To send the report to the printer or a disk file push the ENTER key. This will open a window in the middle of the screen as shown in figure seven. The "X" next to MONITOR tells you that the results of a search or listing will be displayed on the screen. Push the TAB key to toggle through the available settings. When you have the option you want marked by the "X" push ENTER. The options are: PRINTER-Continuous Paper: will print the report on continuous feed paper such as used by dot matrix or laser printers. PRINTER-Single Sheet Feed: prints the report on printers that handle only one sheet of paper at a time ASCII File: saves the report as a text document in a disk file. You can specify the name of the file. dBase File: saves the report in a file on the disk using dBase III format. This report can be used for transferring information between various programs. Most other database software and spreadsheets can read dBase III files. QUICK VIEW: displays a list on the screen. You can then select specific items from the list. (Note: the Quick View feature requires video memory that is usually only available with color monitors. If you get an error when trying to use this feature, your computer does not have the required memory or other software is using this memory). LABELS: for use in printing labels. The other printed reports include form feeds that advance the paper to the next page. If the LABELS option is selected the form feeds are not included. Push the TAB key until the software is set for PRINTER-Continuous Paper. Then push the ENTER key to return to the Reports menu. Notice that the report type listed on the menu has changed to ______________________ORGANIZE YOUR COLLECTION - QUICK START - 16 "PRINTER-C". Push the ESC key to clear the drop-down menus from the screen. Let's try the same search as before. Put "CD" on the CATALOG NUMBER line and push F8. A prompt, asking for a title, will appear at the bottom of the screen. You can type a single line title that will be printed on the top of the first page of your report. If you just push ENTER, without typing a title, the software will automatically print the search criteria on the top of the first page of the report. You can eliminate the title by pushing the space bar once and then pushing ENTER. For this example just push ENTER. The matching entries will be displayed on the screen as they are sent to the printer. When no other matches are found the "NO OTHER MATCHES FOUND" message will appear at the bottom of the screen. When you push any key you will be returned to the main screen. UTILITIES The Utilities menu provides a variety of functions that range from selecting the catalog you want to use to deleting catalog files. I'll discuss the two most important functions here. Catalogs You can create as many catalogs (database files) as you wish, giving each it's own name. Each catalog can have a different format. To change to a different catalog push ALT-U to display the Utilities menu. The last selection on this menu is "Select Catalog Name." Push the up cursor key to immediately move the scroll bar to this selection. Then push ENTER. A window will display the names of the catalogs in the current directory. You can use the cursor keys to highlight any one of them and then push ENTER to select that catalog. You can also create a new catalog (database) by pushing ESC and typing the name you wish to use for the new catalog. Please note that catalog names can not contain numbers and they must be eight characters or less in length. If you enter a new catalog name you will need to set up a format for that new catalog. How to set up a catalog format is discussed next. The names of the existing catalogs will be displayed on the screen you are now looking at. Highlight a catalog name and push ENTER. You are now ready to start entering information or to modify this format to meet your needs. ______________________ORGANIZE YOUR COLLECTION - QUICK START - 17 Modifying A Catalog Format To modify a catalog format push ALT-U to display the Utilities menu. Move the scroll bar to the "Set Up New Cat. Format" option and push ENTER. This will display a screen similar to the one shown in figure eight. This set-up screen replicates the way the information entry area looks on the main screen. There are four things you can set on this screen: 1. The line title. 2. Toggle lines on and off (abbreviated as LINE TGL). 3. Select the lines to be indexed (alphabetized). 4. Select the lines to be totaled. Please note that once you have saved one or more entries in a catalog you can no longer toggle lines on or off in that catalog. You can change the titles, indexing and totalling settings at any time. Unless you set the software to use a new catalog name, the F2 prompt for "LINE TGLE" will never appear - because there are two entries in the catalog we have been using for the examples. (NOTE: these entries can be erased or the entire catalog deleted from your disk. This functions are discussed in the reference section). For now you may want to use a new catalog name (selecting a new catalog name is described on the previous page). On the Catalog Format Set UP screen the F2 key is used to select what you wish to set/modify. When working with a new catalog, in which no entries have been saved, the brackets next to the F2 prompt at the bottom of the screen will contain the word TITLES. This means you can type new titles or modify existing titles. Setting Line Titles As this software is designed for a specific type of collection, five lines are preset for cataloging basic information about your collection. These are highlighted in green on the set up screen and may not be changed. A scroll bar can be moved up and down through the list of line titles, using the cursor keys. Place the scroll bar on the line you wish to change and type the new title. Then push ENTER will move the scroll bar down to the next line. If you wish to have a blank title, push the space bar and then push ENTER. Line titles may be up to 14 characters long and can contain letters, numbers, ______________________ORGANIZE YOUR COLLECTION - QUICK START - 18 spaces and any other keyboard characters. You do not have to put a title on every line and you can skip lines. The next step is to select which lines you want to use. Push F2 once and the phrase "LINE TGL" will appear in the brackets next to the F2 prompt. Position the scroll bar on the line you want to turn on or off and push ENTER. A highlight bar showing the length of the line will appear and a number specifying the length will be displayed. For information about the line lengths and intended purpose of the default settings of the line titles see appendix B. If a title is entered for a line that is turned off, that line will not appear on the main screen. On the other hand a line does not need to have a title in order appear on the main screen and be available in the catalog. You can include lines that have no titles as a part of a format. The factor that determines whether or not a line and its associated title is displayed as a part of a format is whether that line is turned on or off. Notice at the bottom of the screen that there is a bar containing the abbreviation "EST". The number in this bar provides an estimate of the number of entries you'll be able to store in a megabyte of space. As you the number of lines to be included, and add or take away lines to be indexed, this number will change. Selecting Lines To Index Once you have set which lines are to be on or off push F2 again. You'll now be able to select the lines you want to have indexed. An index for a computer is the same thing as it is for a book. If you need to quickly find something in a book, you look in the index. It's the same for a computer. An index is an alphabetical listing that allows the computer to find something quickly. To select a line to be indexed put the scroll bar on that line and push ENTER. Please remember that this will only work if the word "INDEXING" appears in the brackets next to the F2 prompt. When you push ENTER to select a line to be indexed a starburst symbol will appear next to that line. This symbol indicates that the line will be indexed. On the main screen the starburst symbol indicates the lines which are indexed and thus can be listed alphabetically. Getting Total Values Push F2 one more time and the word in the brackets will change to "VALUE". You can now select lines you want to have totaled at ______________________ORGANIZE YOUR COLLECTION - QUICK START - 19 the end of a report. Select the lines to be totaled in the same way you selected lines to be indexed. In this case three horizontal bars will appear to the right of the line to indicate that any values entered on the line will be totaled. This capability is used, for example, to get the total value of all items listed for insurance purposes. Push F2 again to return to the TITLE setting. Once you have set-up the format to be as you need it, push F5 to save it. You will be returned to the main screen. This completes the quick start section. In this section I have provided the basic information needed to use the software. There is a lot more you can do with this software and the details are provided in the next section of this manual. ________________ORGANIZE YOUR COLLECTION - REFERENCE SECTION - 20 SECTION FOUR - REFERENCE SECTION This section of the manual provides detailed descriptions of each function on the drop-down menus. We'll start with the Make entries menu and work from left to right through the menus and cover each item on each menu. But first let's go over the information and options presented on the main screen. THE MAIN SCREEN Most of the time you'll be using functions that are accessed from the main screen. This screen includes a listing of menus across the top of the screen. The top line also includes the current entry number in the upper right corner of the screen. When typing a new entry the number displayed in the upper right is the entry number that will be assigned to the new entry. When editing or displaying the results of a search, the number displayed is the entry number associated with the information currently on the screen. Some people have tried using the entry number as a catalog number. I understand we all have different requirements and need to use the software in different ways, but I do not recommend using the entry number as a catalog number. My reason is that the entry number associated with a specific item can change if you delete an item from your database. The entry number is only intended to help you see how many total items you have in the database and to help you navigate around in your database. The second space from the top of the screen includes a horizontal double line. This is a status line. The current database filename in use will be displayed in the middle of this line. The function currently being used (i.e. make entries, editing, searching, etc.) is identified on the right side of this line. The left side of this line also includes status information. For example, if you push the INS key to put the software into the character insert mode, the letters "INS" will be displayed at the left edge of this line. As long as INS is shown there, the software is in the character insert mode. The space at the bottom of the screen also contains a horizontal double line. This bottom line is a prompt/status line. At some times F-Key functions that are not included on the drop-down menus are used. These are used only for specific functions and a prompt will appear on the bottom line describing each function. ________________ORGANIZE YOUR COLLECTION - REFERENCE SECTION - 21 The bottom line also displays status, such as telling you when a search is complete. Clearing The Screen There is one key that is very handy, the F7 key. Pushing F7 will clear the screen of all catalog information and return you to the Main Screen. If you are in the search or edit mode, and want to go to the make entries mode, push F7. If you need to erase a screen full of information, push F7. Typing Information Whether you are making a new entry or entering search criteria typing information on the main screen is done in the same way. The cursor can be moved around using the up/down and right/left cursor keys. When using the up/down cursor keys the cursor will move directly up and down - it will not return to the beginning of a line when moved to a new line. You can move the cursor to a new line and return it to the beginning of that line by pushing the ENTER key. Each time you push the ENTER key the cursor will move down by one line. When the cursor is on the bottom line, pushing ENTER will move it to the top line. To quickly move the cursor to the right you can use the TAB key. Each time the TAB key is pushed the cursor will move five spaces to the right. Whenever the cursor reaches the beginning or end of a line your computer will beep to indicate it can go no further. You can type information at any time. The character you type will be placed at the cursor location and the cursor will move one space to the right. The software will accept accented characters, characters used in some European languages as well as all English language characters. It will not accept most graphics characters. Insert & Delete If you need to insert characters, place the cursor at the point where the characters are to be inserted. Push the INS key. The letters INS will appear on the upper left of the screen (second line). You can now type the characters or words you want to insert. As you type, any information to the right of the cursor ________________ORGANIZE YOUR COLLECTION - REFERENCE SECTION - 22 will move to the right. If the existing information reaches the right edge of the line, it will disappear and be lost - one character will disappear for each character you insert. To get out of the insert mode either push the INS key or push ENTER. Characters can be deleted by pushing the DEL key. When the DEL key is pushed the character at the cursor location will be erased and everything to the right of the cursor will move left by one space. Memos Each entry may also include a memo. To display the memo screen push the PgDn key. A word processor-like memo screen with 20 lines will appear. You can type any information you want on the memo screen. However, information typed on the memo screen can not be included in searches nor is it included on the printed reports. This screen is just for keeping notes and miscellaneous information. When using the memo screen all normal word processing features will work. The INS and DEL keys work as they do in a word processor. The memo screen also includes word wrapping eliminating the need to push the ENTER key at the end of each line. When you have finished typing the memo push ESC to return to the main screen. The memo you just typed will permanently be attached to the entry you are making or editing. General Guidelines When making entries be consistent. Anytime you use an abbreviation be sure it is typed the same way every time. Be consistent in how you capitalize words. For example, don't capitalize all of the words on a line one time and then use upper and lower case on that same line with a later entry. If you use commas to separate items in a list, always use commas to separate items in a list. When entering numbers first determine what the largest number will be and then always use the same number of digits to the left of the decimal point for all numbers. For example, if you expect to have numbers as high as 10000 then number one should be entered as 00001. This is necessary if you want the computer to be able to sort numbers into correct numerical order. You can ________________ORGANIZE YOUR COLLECTION - REFERENCE SECTION - 23 include decimals (eg. 001.52), but you do not need to include ".00" if there is nothing to the right of the decimal point. THE MENUS this software provides drop-down menus. All of the capabilities of the software are accessed through these menus or directly using F-keys. The names of the menus are listed across the top of the screen as shown in figure nine. The name of each menu contains one capitalized word. To select a menu hold down the ALT key and press the capitalized letter in the menu's name. For example, to select the Make entries menu push the ALT key and the letter M. Once one of the menus is displayed (dropped down) you can move from one menu to the next using the left/right cursor keys. When a menu is displayed the top selection on the menu will be highlighted by a scroll bar. The scroll bar can be moved up and down through the menu selections using the up/down cursor keys. To select an item on a menu first highlight it with the scroll bar and then push the ENTER key. Make entries Menu - Save <F5> The "Save" function is used after you have typed a new entry. Once you have typed all the information you want to enter select the "Save" option to save it in your database. You can also push F5 to directly save the entry without going through the menus. Make entries Menu - Copy Any Previous The "Copy Any Previous" function allows you to copy any previous entry you've made. When you select this option you will be prompted for an entry number to copy (see figure 10). This prompt will also display a default entry number. In figure 10 the default setting is 2. To copy the default entry number just push ENTER. Otherwise you can type in any other entry number you wish to copy. The default entry number will be set to the last entry that was copied. This way you can repeatedly copy a previous entry by just pushing the ENTER key at this point. ________________ORGANIZE YOUR COLLECTION - REFERENCE SECTION - 24 Make entries Menu - Copy Last <F3> The "Copy Last" feature allows you to quickly copy the last entry you made. This copy method does not prompt for an entry number to copy and thus is faster than the "Copy Any Previous" feature. The quickest way to copy the previous entry is to push F3. The "Copy Last" feature is used when you have a series of similar entries to type. You can type the first one, push F5 to save it, then push F3 to repeat the information you just entered. You then only need to change a few lines or characters and save the modified entry as a new entry. Copy A Single Line You can also copy individual lines from the previous entry. To copy a single line put the cursor on the line you wish to fill with information copied from the same line in the previous entry. Then hold down the ALT key and push F3. For example, if you are entering information about a series of books all written by the same author, you would start by entering the information about the first book in the series. Then push F5 to save that entry. When you are ready to enter the author's name for the second book put the cursor on the AUTHOR line, hold down the ALT key and push F3. This will copy the author's name from the previous entry. Make entries Menu - Erase Screen <F7> The "Erase Screen" feature is used to completely clear all of the information from all lines. Selecting this option from the menu, or pushing F7, will immediately clear all of the lines. If you need to clear just one line or part of one line you can use the macro feature discussed later in this section. Make entries - Make Entries The "Make Entries" selection provides a way for you to leave any of the other functions and go to the basic make new entries screen. For example, if you are in the search mode and would like to make a new entry, select this option on the Make entries menu. ________________ORGANIZE YOUR COLLECTION - REFERENCE SECTION - 25 THE EDIT MENU The edit function provides a way for you to display any entry on the screen and browse backward and forward through your database. Once an entry is displayed on the screen it can be modified or deleted. Edit Menu - Select Number The "Select Number" option is how you tell the software which entry number you want displayed on the screen. You may enter any valid entry number. Once an entry is displayed on the screen you may make changes using the same methods used to originally type the entry. The TAB, INS and DEL keys all will work as they do in word processing software. Once you've made changes push F5 to save the changes. Edit Menu - Page Backward <F1> When the "Page Backward" function is selected the software will display the entry that comes directly before the entry that is currently displayed. You can also press F1, without using the drop-down menu, to move backward by one entry. Edit Menu - Page Forward <F2> The "Page Forward" function displays the next entry in sequence. You can also press F2 to see the next entry without using the drop-down menus. The "Page Backward" and "Page Forward" functions provide an easy way for you to browse through all of your entries. Computers are nice, they can quickly search for and find any entry you need. However, sometimes it's nice to just look through your database (catalog) to see what's there. You may discover items you forgot you had. The Page Forward/Backward features give you a way to do some browsing. Edit Menu - Delete Entry <F4> If you need to eliminate an item from your database use the "Select Number" option to enter the entry number to be deleted. ________________ORGANIZE YOUR COLLECTION - REFERENCE SECTION - 26 Once it is displayed on the screen push ALT-E and select the "Delete Entry" option. When an item is deleted it is not permanently removed from your database. The deleted entry will no longer be included in searches, but you can display it using the edit feature. All of the information still exists and can be brought back. With computers mistake sometimes seem to be very easy to make. A common mistake is to start deleting something and just as the final key is pushed to make the deletion final you realize that you did not want to delete this item. However, the thought comes just a half a second too late. If this should happen with this software you can recover the deleted entry. You might want to delete an entry if it is an item you've sold, but you still want to maintain a record of having once owned this item. You might also delete lost items that you intend to replace. When you get a replacement you can recover the deleted entry without having to retype it. If you are maintaining a mailing list you may wish to delete names that you need to temporarily remove from your mailing list. For example. you may want to delete someone who has changed jobs, but who you may want back on your mailing list in the future. When a deleted entry is displayed on the screen the words "Deleted Entry" will be displayed on the second line from the top of the screen. Edit Menu - Undelete Entry Deleted entries can be returned to the database by first displaying the entry on the screen and then selecting the "Undelete Entry" option on the Edit Menu. Edit Menu - Remove Memo Whenever you go to the memo screen (by pushing PgDn) a memo will be attached to the current entry. Even if nothing is typed in the memo, there will still be a memo attached to the current entry. That memo can be removed by going to the Edit Menu and selecting the Remove Memo option. If the current entry has a memo attached to it, that memo will be removed. Edit Menu - Save Changes <F5> The final selection on the Edit menu will save any changes you've made to an entry. You may make changes to an entry anytime it is ________________ORGANIZE YOUR COLLECTION - REFERENCE SECTION - 27 displayed on the screen. First type the changes then select "Save Changes" on the Edit menu. You can also push F5 without using the drop-down menus. THE SEARCH MENU Figure 11 shows the Search menu. This menu is used to start all of the listings and searches. The top box on the Search menu includes the two types of listings available. The second box down includes all of the searches. The third box includes controls for searches. Whenever a search has displayed an entry on the screen you may make changes and resave the modified entry. Just type the changes and push F5 to save them. During a search or listing you can look at each entry on the screen and browse forward and backward using the F1 and F2 keys. Pushing F2 will display the next matching entry. Pushing F1 moves you backward to look at the previous match. NOTE: for information on how to print a report go to the Reports Menu section of this chapter. The software is normally set to display the results of listings and searches on the screen. By changing the "Send To" option on the Reports Menu you can send your report to your printer or a disk file. Search Menu - List Entries The "List Entries" feature allows you to list entries in the order they were typed into your database. When you select "List Entries" on the Search menu you will be prompted for the entry number you want to start the listing with. Then you will be prompted for the last entry number to be included in the listing. The software will then list all of the entries between, and including, the entry numbers you specify. One of the key uses for this feature is for proof reading. Some people find it easier to proof read a printed copy of their entries instead of reviewing them on the screen. After you've typed a series of new entries use this feature to print a listing of just the new entries. You can then look over the listing to find typos and errors. Be sure to use a report format that prints all of the information you've entered. ________________ORGANIZE YOUR COLLECTION - REFERENCE SECTION - 28 Search Menu - List Alphabetically You can list the information on any of the lines in alphabetical order by selecting this option. However, the line must first be indexed. Lines that are indexed are marked by a starburst symbol. (Indexing is discussed in the Utility menu section). To get an alphabetical listing first put the cursor on the line to be listed alphabetically. Then push ALT-S to display the Search menu. Move the scroll bar to the "List Alphabetically" option and push ENTER. The entries will be listed in alphabetical order based on the line on which the cursor is located. Search Menu - Sequential Search There are two basic types of searches in this software - sequential searches and alphabetical searches. A sequential search looks at each entry, one at a time in "sequence", examining each to see if it contains a match for the search criteria. This type of search has the advantage of being able to find matches even if the matching information is not the first thing on the line. For example, if you use a sequential search to look for the word RED the following will be found as matches: RED ROSES FOR A BLUE LADY LITTLE RED WAGON SLEEPY AND TIRED Notice that the search criteria, RED, is capitalized and all of the matches are capitalized. Searches will only find EXACT matches. If the letter, word or phrase you are searching for is capitalized, the search criteria must be capitalized. If you search for RED, you will not find "Red Roses" because the capitalization does not match. There is a way to find matches when the capitalization does not match and it will be discussed as a part of the "Case" option on the Search menu. With sequential searches you can search for any part of the information entered on a line. Notice in the above example that searching for "RED" found matches at the beginning, middle and end of the line. This is particularly useful if you can only remember a part of what you want to find. It's also useful for keyword searches where several keywords are listed on a line. For example, if you cataloged a photograph of a beach with the ________________ORGANIZE YOUR COLLECTION - REFERENCE SECTION - 29 following keywords: BEACH, SUNSET, SAILBOATS & SEA GULLS and used a sequential search to search for "SUNSET" this photograph would be identified as matching the search criteria. Cross References Any of the information you've entered can be cross referenced with any or everything else. All you need to do is enter the information you want to find on the appropriate lines and the software will automatically take care of the cross referencing during the search. Let's assume you've got a mailing list and want to send a newsletter to everyone with the last name of SMITH who lives in California. Start by entering "SMITH" on the Last Name line and " CA " on the City/State line. Then start a sequential search. All of the Smiths living in California will be listed. I included a space before and after the abbreviation for California on purpose. If you search for "CA" the search will not only find the abbreviation CA, it will also find every city with CA in its name. Putting a space before and after "CA" limits the search to just the abbreviation for California because the abbreviation for the name of a state will always have a space before and after it. Search Menu - Alphabetical Search <F6> To use the alphabetical searches you must be using the indexing. A line must be indexed, and must have a starburst next to it in order to be used as the basis of an alphabetical search. Alphabetical searches provide several advantages. First, they are very fast. While sequential searches may take several minutes, if you have a large database, alphabetical searches can find matches almost immediately. The indexing quickly determines whether there is a match and where the match is located. Second, alphabetical searches list matches in alphabetical order. The disadvantage of alphabetical searches is that they will only find exact matches. For example, an alphabetical search can not find matching words or phrases if they are within a line. The match must be exact starting at the beginning, left edge of the line. For example, using an alphabetical search to find the word "RED" would find RED ROSES FOR A BLUE LADY but it will not find LITTLE RED WAGON. ________________ORGANIZE YOUR COLLECTION - REFERENCE SECTION - 30 There are several ways to conduct an alphabetical search. The first is a straight alphabetical search. Enter the information you want to find on one of the lines marked by a sunburst, leave the cursor on that line, push ALT-S to drop-down the Search menu, highlight "Alphabetical Search" and push ENTER. You can also start an alphabetical search without going through the menus by pushing F6. Alphabetical searches can include cross reference information. Fill in the information you want to find on the appropriate lines, put the cursor on the line you wish alphabetized, and push F6 to start the search. NOTE: When starting an alphabetical search the cursor must be on a line that has been indexed. The alphabetical searches use the location of the cursor to determine the primary search criteria. If the cursor is not on a line that has been indexed, you will get a "Can't find required index" error message. The alphabetical searches can also be used to get partial alphabetical listings. For example, if you want an alphabetical listing of everything that starts with the letter "A", put an "A" on the line to be listed (that line must be indexed) and start the alphabetical search. Alphabetical searches will first find all exact matches based on the indexes. When no other matches can be found in the indexes a message will appear at the bottom of the screen that says: NO MATCHES FOUND. ESC to end, F1 for new entry or ENTER to continue search. If you wish to end the search push the ESC key. If the search did not find any matches you can push F1. This will bring you to the Make Entries screen and the information you entered as the search criteria will be pre-entered in the appropriate fields. If the software has found a match pushing F1 will put the information from that matching entry on the Make Entries screen. If you did not find what you were looking for using the alphabetical search you may wish to try a sequential search. Push the ENTER key at this point and the software will automatically go into a sequential search. What do you do if you are typing entries and want to be sure you are not duplicating entries already in your database. Type part of the entry, such as the last name on a mailing list, and push F6 to perform an alphabetical search. If the name is found push ESC. If the name is not found push F1 and them complete the entry. ________________ORGANIZE YOUR COLLECTION - REFERENCE SECTION - 31 Search Menu - Find Deleted Once an entry has been deleted using the editor it will no longer show up during searches. You need to use the editor to display it and then undelete it. However, if you don't remember its entry number, you can't use the editor to display it. The "Find Deleted" search provides another way to locate deleted entries. Select "Find Deleted" on the Search Menu and the software will automatically list all entries that have been deleted. Whenever a deleted entry is on the screen it may be undeleted by pushing ALT-E for the Edit Menu and then selecting "Undelete Entry". If you are searching for deleted entries the software will remain in the search mode and pushing F2 will find the next deleted entry. Search Menu - Global Search The term "Global Search" means that the software will search everything for a match to the specified search criteria. In all of the other searches the search criteria must be on the same line as the information you want to find. If you are searching for a specific last name, the name you want to find must be entered on the LAST NAME line. With a Global Search you can find a word or phrase regardless of the line it is located on. To start a Global Search select "Global Search" from the Search Menu. A window will open in the middle of the screen (see fig. 12) and you will be prompted to enter the word or phrase you want to find. Type the search criteria and push the ENTER key. A sequential search will be conducted based on the search criteria you entered. Remember a Global Search will find the specified search criteria wherever it is located. There may be times when an entry is displayed as matching the search criteria and it may not be obvious why it matches. However, the match may be taking place in the middle of a line or even in the middle of a word. Search Menu - Set Starting Point This option is used to start an alphabetical listing at any point in the alphabet. For example, let's assume you were printing an alphabetical list of everything in your database and the printer ran out of paper in the middle of the M's. After putting more paper in your printer you can start a second listing that picks up where the first ended. ________________ORGANIZE YOUR COLLECTION - REFERENCE SECTION - 32 To set a starting point first position the cursor on the line you wish to list alphabetically. Then push ALT-S and select the "Set Starting Point" option on the Search Menu. You will be prompted to enter a letter or word to be used as the starting point. You can also enter a phrase. If you were printing a copy of your mailing list alphabetically by last name and the last name listed was MORRIS, then enter "MORRIS" as the starting point. When you push ENTER you'll be returned to the Search Menu. Highlight the "List Alphabetically" option and the listing will start with MORRIS. This feature is very useful in producing reports for your insurance agent. For example, for each item in a home inventory you should enter a value. If you index the value line you can then set a starting value, such as $500, and list every item that has a value greater than the minimum value you set. Search Menu - Case [ Sensitive ] When I discussed sequential searches I said that they will only find exact matches. The capitalization of the search criteria and the information you are searching for must match. For example, searching for "Red Roses" will not find "RED ROSES" as a match. The "Case" option on the Search Menu allows you to find matches in which the capitalization does not exactly match. This option is a toggle. When the word "Sensitive" is in the brackets sequential searches will be case sensitive. This means the capitalization of the search criteria and the information you are looking for must match. Highlight the "Case" prompt and push ENTER to toggle it to "Insensitive". When set to insensitive sequential searches will not be case sensitive. This means you can search for "Red Roses" and "RED ROSES" will be found as a match. Set this way sequential searches will also find "red roses" and "Red roses" as matches. Search Menu - Save Changes <F5> Anytime information is displayed on the screen you may make changes. If you conduct a search and find a matching entry you can modify that entry. After you have typed the changes you want to make push ALT-S and then select "Save Changes" to save the modifications. You can also push F5 without using the drop-down menus. ________________ORGANIZE YOUR COLLECTION - REFERENCE SECTION - 33 Search Menu - Search Again <F2> If you are displaying the results of a search on the monitor, the software will display matching entries one at a time. To find and display the next matching entry select the "Search Again" option on the Search Menu. Please note that when the Search Menu drops down the "List Entries" option will be highlighted. You can move the scroll bar directly to the "Search Again" option by pushing the up () cursor key. You can also push F2 without going through the Search Menu. Screen Print Feature Anytime an entry is displayed on the screen as a result of a search (or when it is called up using the editor) a copy of the entry can be printed by holding down the CTRL key and pushing P. The entry will be printed using the current report format. If a report format has not been set-up, then nothing will print. Finding The Total Value Of Your Collection You can quickly get a total value for your collection by holding down the CTRL key and pushing ENTER. The software will search your entire catalog and provide a total value, based on the line(s) you have set to be totalled. The amount of time this takes will depend on the number of entries. If you need to interrupt the totaling process, push ESC. THE UTILITIES MENU The Utilities Menu provides a variety of functions for copying entries, indexing and setting up your databases. Press ALT-U to drop-down the Utilities Menu. The Utilities Menu is shown in figure 13. Utilities - Copy Entries The "Copy Entries" feature is used to copy the entries in one file to a new file. This feature allows you to copy your database to a new file that uses a different format. You'll be able to rearrange the information sending it to different lines in the new file, if you wish. ________________ORGANIZE YOUR COLLECTION - REFERENCE SECTION - 34 One circumstance in which you would use this feature would be if you should find that a database format you've designed is not adequate for what you need to do. Since you can not modify an existing format you will need to set-up a new file with a format that is suitable. You would then use the "Copy Entries" feature to copy your existing entries from the old filename to the new filename and format. To use the "Copy Entries" feature use the scroll bar to highlight "Copy Entries" on the Utilities Menu and push the ENTER key. This will bring up a series of screens that let you select the file to copy from, the file to copy to and what information will be stored on which line in the new file. Figure 14 shows the screen used to select the file you wish to copy from. The box in the middle of the screen shows the names of the database files in the current directory. Use the cursor keys to highlight the filename you wish to copy and then push ENTER. If you want to copy a file that is in a different directory push the ESC key and enter the drive and path that designate where the file is located. When entering the drive and path you must use standard DOS notation. The drive letter must be followed by a colon and each directory or subdirectory name proceeded by a backslash. If the drive and path you enter does not contain a data file, an error message will appear in the box. If data files do exist they will be listed in the box and you can then highlight the one you wish to copy and select it by pushing ENTER. NOTE: If you do not keep your programs in separate directories the listing of file-names in the box may contain the names of data files used by other programs. Normally you should keep all files used by the this software in the same directory. That helps keep your hard disk organized and makes it easier for you to identify what files go with which program when you are when you're cleaning up and organizing your hard disk. To exit at this point you need to push the ESC key twice. First push the ESC key to get the prompt asking for a new drive and path. Then press the ESC key again. Once you have selected a file to copy from a second, but similar screen will appear. (Note, the copy from screen has a red "shadow" under the box while the copy to screen has a black "shadow"). The name of the file you are copying from will be shown at the top of the screen. Select the file you wish to copy to by highlighting it and pushing the ENTER key. ________________ORGANIZE YOUR COLLECTION - REFERENCE SECTION - 35 If you want to create a new file to copy to then push the ESC key. You will be prompted to enter a new drive, path and filename. When entering a new filename do not enter a filename extension. You must enter a valid drive letter and directory path. The software will not create a new directory if the path you've entered is not correct. If you use a new filename the software will automatically create a file with a format that matches that of the file you are copying from. The next screen, shown in figure 15, allows you to select which information is copied to which field. First let's go over the information provided on this screen. At the top left of the screen the drive, path and filename you are copying from will be shown. The same information for the file you are copying to will be shown on the top right side of the screen. The format of the file you are copying from will be listed on the left side of the screen. Each line is identified by a letter and the title of each line is shown. The line titles of the file you are copying to are shown on the right side of the screen. A set of dashed lines in the center of the screen are provided only to help you see how the two formats line-up. At the bottom of the screen the total number of entries currently in each file is shown. When the copy process is started the data from the database shown on the left will be ** added to ** the data in the database file on the right. You can start copying entries from the file shown on the left to the one shown on the right by pushing F6. However, there is more information shown on this screen. Figure 15 shows a situation in which we want to change how information in a catalog is arranged. The format on the right puts the CATALOG NUMBER at the top of the format and adds a new line for a CONDITION. In addition, the ORIG. VALUE line is not included in the new format. When the screen shown in figure 15 first appears it will be set to copy the information from each line on the left to the line directly opposite on the right. If there is no line on the right, the space on the right will be highlighted and a left pointing arrow head will be displayed. For example, in figure 15 the format is set so the DESCRIPTION line will be copied to the a line that is shut off. This means that this information will not be copied. ________________ORGANIZE YOUR COLLECTION - REFERENCE SECTION - 36 A scroll bar is provided to move through the line descriptions on the left side of the screen. This scroll bar is used to re- position lines until they are set in the proper order for copying information to the new filename. For example, the DESCRIPTION line on the left is currently set to be copied to the CATALOG NUMBER line on the right. To change this use the scroll bar to highlight the location you wish to move another line to and then push the letter associated with the line you wish to move. The two lines will be swapped. Let's look at an example. Looking at the left side of the screen. In this case we want to move the CATALOG NUMBER line to the spot where the DESCRIPTION line currently is located. To do this use the scroll bar to highlight "DESCRIPTION" and push the letter "G" (the letter that indicates where "CATALOG NUMBER" is located). The result is shown in figure 16. Shareware users note: this is difficult to describe without the illustrations. To see how this works try highlighting various line lines and push the letters associated with other lines. You'll see how the lines are moved around. You can leave this screen without making any changes by pushing the ESC key. If you move a line so that its contents will be copied to a shorter line, that shorter line will be highlighted in red to indicate that some of the information on the original line may be cut off because it will not all fit on the shorter line. You should now see a screen that looks like the one shown in figure 18. All of the lines have been positioned to be copied to the correct locations. We can now push F6 to start the copy process. If there are any entries in the file shown on the right side of the screen, the new entries copied from the file on the left will be added to those already in the file on the right. You can exit from the copy process by pushing the ESC key. Utility Menu - Import dBase File You can import the information contained in any dBase III file. To do this select the "Import dBase File" option on the Utilities Menu. You will then go through a series of screens that are exactly like those in the "Copy Entries" feature. (Please read the previous section which discusses the "Copy Entries" feature). ________________ORGANIZE YOUR COLLECTION - REFERENCE SECTION - 37 The first screen that appears is used to select the dBase file you wish to copy from. Any dBase III files in the current directory will be listed in a box in the middle of the screen. If the file you want to copy from is on another drive or in another directory, push the ESC key and enter the drive and path you want to use. If there are dBase III files on the specified drive and path they will be listed in the box and you can select the one you want. Next the list of existing catalog files will be displayed. You can copy the dBase file to an existing catalog or create a new catalog. To create a new catalog push the ESC key and enter the drive, path and catalog name. If you enter a new catalog name the software will automatically create a format that matches that of the dBase file you are copying from. Next you will see a screen that allows you to set which information gets copied to which line (figure 19). This is the same screen as described in the section on Copy Entries and it works in exactly the same way. Utilities Menu - Reindex First, what is an index and why does this software need to use indexes? A computer based index is just like an index in a book. When you need to find something in a book you look in the index. The index lists information alphabetically and allows you to quickly find what you need. A computer index works in the same way. It is an alphabetical listing that allows the computer to quickly find the information you are searching for. Just as with a book a computer has two ways to find information. If you are looking for specific information in a book you can start reading the book at page one and read until you find what you want. As you can imagine this could take a lot of time, especially if the information you are looking for is at the end of the book. Your other option is to look in the index and then go directly to the page that has the information you want. This is exactly what a computer does. A sequential search is similar to starting at the front of a book and reading every page until the required information is found. To find information quickly the alphabetical search uses an index to look up the required information and then go directly to the entry that has that information. ________________ORGANIZE YOUR COLLECTION - REFERENCE SECTION - 38 Indexes are also required to list information in alphabetical order. The software uses the indexes, which are in alphabetical order, to generate alphabetical listings. The lines to be indexed are selected when the format is set up. I'll discuss that in the section on "Set Up New Format". The software will normally keep all indexes up to date - adding new entries as you type them. However, there may be some circumstances in which you need to rebuild your indexes. If the software does not properly detect an index that should be there, an error message (figure 20) will appear. This message will tell you that the indexes need rebuilding. You can add additional lines to be indexed at any time. For example, you may originally start a mailing list in which only the ZIP CODE is indexed. If you later decide to index by last name, you would use the "ReIndex" feature to put the existing entries into this new index. Indexes are in separate files that maintain a fragile relationship among many separate words and phrases. If the files on your disk become fragmented or cross linked the indexes can be damaged. Although indexes do not effect your catalog files, if when you conduct a search the results of the search do not seem to make sense, then try making new indexes by using the "ReIndex" feature. The "ReIndex" feature is completely automatic. To reindex just use the scroll bar to highlight "ReIndex" on the Utilities Menu and then push ENTER. Utilities Menu - Sort [ Off ] This software has the capability to do multiple level sorting. Sorting means to put entries into alphabetical order. The alphabetization provided by the indexing puts entries in alphabetical/numerical order one line at a time. Sorting can include up to 10 lines in determining alphabetical order. For example, you could produce a listing in numerical order by ZIP CODE and for each zip code have people listed alphabetically by their last name. This would be a two level sort. If your catalog has not been sorted the word "OFF" will be in the brackets after the word SORT. If it is in a sorted condition, the word "ON" will be in the brackets. Now let's see how to sort. Start by selecting the "Sort" option on the Utilities Menu. The Sort Menu, shown in figure 21, will appear. The line titles used ________________ORGANIZE YOUR COLLECTION - REFERENCE SECTION - 39 by the current database will be listed along the left side of the screen. There will be a series of F-key prompts along the bottom of the screen. To set the order in which you want the database to be sorted push the letter associated with the line to be sorted. Do this in the order you wish the lines to be sorted. For example, if you want a mailing list sorted into zip code order and then for each zip code you want it to be in order by last name, you would first select the zip code line. In figure 21 the zip code line is line "G". Push the letter G to select the zip code line. Next select the last name line by pushing the letter A. As you push each letter a diagram will appear that shows the sorted order of the lines you have selected (figure 22). Once the order displayed matches what you want push F6 to start the sorting. From this point on the software will take care of everything automatically. Once the sorting is complete you can get a printed copy of your mailing list, in the correct sorted order, by doing an alphabetical listing based on the zip code. NOTE: You can include any line you wish in doing a sort. However, to produce an alphabetical listing the line used as the basis of that listing must be indexed and must be marked by a "starburst" symbol. For example, to list a mailing list in order by zip code and for each zip code have each entry listed alphabetically by last name, the ZIP CODE line must have a starburst symbol. The LAST NAME line does not need to have a starburst symbol unless you wish to get an alphabetical listing solely by last name. Getting back to setting up the sorted order of the lines, if you start selecting lines to sort and want to make a change, push F3. The F3 key will clear any sorted order that exists and clear the diagram from the screen. The F8 key is used to clear a sort. What does this mean? Sorting rearranges the entries so they are in the specified sorted order. Once sorted, for example, a sequential search will look through a mailing list based on the sorted order instead of the order the entries where originally typed. The "F8 - Clear Sort" function instantly returns your database to its original unsorted order. The indexes will still be in the sorted order, but sequential searches will no longer follow the sorted order. If you also wish to return the indexes to an unsorted condition all you need to do is ReIndex. ________________ORGANIZE YOUR COLLECTION - REFERENCE SECTION - 40 Indexes use space on your disk. The more entries you have the more space an index will use. If you have an index you no longer need you can delete that index by pushing F9. You will be prompted to enter the letter that is next to the line for which you want to erase the index. If you do not want to erase a index at this point, push ESC. Otherwise push the appropriate letter. The circumstances in which you might want to erase an index would be if you find you had originally set up a line to be indexed, but you are not using that index. You would first use the "Set Up New Format" feature to turn off that index, then go to the Sort screen to erase the index that was just turned off. Utility Menu - Reserve Space Next on the Utility Menu is the "Reserve Space" feature. This feature will set aside space on a hard disk for future entries. When the "Reserve Space" option is selected a window will open, display the number of entries currently in your catalog and prompt you for the amount of space you want to reserve. Estimate the total number of entries you expect to have and enter a number that will reserve enough space to hold them. Reserving space does not set a limit on the number of entries you can have. For example, if you reserve space for 100 entries, you can still make as many entries as you wish. The software will fill the 100 reserved spaces and then continue on without any problems. Also, you do not need to reserve space in order to use this software. The purpose of reserving space is two-fold. First, if you expect to have a lot of entries in your catalog, and you are using other software on the same disk, the reserve space feature is used to set aside disk space for use by this software. This will insure that the disk space you want to use for your catalog is not used up by files created by your other software. The reserve space feature is also used to help prevent the this software data file from becoming fragmented. Fragmented files are a normal result of using a computer. When a computer stores information on a disk it puts it into the next available sector on the disk. The next available sector may not be physically located anywhere near the previous sectors the computer was using. As you add to a data file it tends to be broken into small pieces that are scattered in various sectors all over the disk. The problem with fragmented files is that they slow down your computer because it takes more time for the heads in your disk ________________ORGANIZE YOUR COLLECTION - REFERENCE SECTION - 41 drive to move from piece to piece of a file that is scattered all over a disk. With serious file fragmentation the computer can actually lose track of pieces of a file or start to get cross linked files. As a result the computer can become "confused" and lock-up, you might start getting strange results for searches or be unable to access some entries. (I've had this happen with WordPerfect and Lotus 123 files). Reserving space helps prevent your this software files from getting fragmented. If you start with a disk that has just been de-fragmented and reserve enough space to accommodate the anticipated number of entries, the data file that is created will stay together in one piece regardless of any other activity that affects the disk. Notice that I said you should start with a disk that was just de-fragmented. How do you de-fragment a disk? You will need a utility that has been designed to do that. Take a look in Appendix B for a further discussion of fragmented files and descriptions of several utilities I recommend. Utilities Menu - Eliminate Deleted When an entry is deleted (using the Edit function) it is not erased. It still exists. What the software does is mark the entry as being deleted so it will not show up during searches or listings. If you want to permanently remove an entry from your data files you need to use the "Eliminate Deleted" feature. When you select the "Eliminate Deleted" feature on the Utilities menu the software will go through your entire database and permanently remove all deleted entries. The disk space used by the deleted entries will be recovered and made available for new entries. This process is automatic and there is nothing you need to do. Once started you can not interrupt this process. If it should be interrupted your database might be left with an entry duplicated (entered twice). There is no risk of losing data however, so if this process is interrupted by a power failure for example, all of your entries will still be there. Eliminating deleted entries will change the entry numbers for many of the entries in your database. You should reindex after using this feature. If you want to eliminate deleted entries without having the entry numbers change you can use the editor to individually type a new entry that replaces the old, deleted entry. ________________ORGANIZE YOUR COLLECTION - REFERENCE SECTION - 42 Utilities Menu - Set Up New Format This feature is used to both set up new catalog formats and to modify an existing format. The "Set Up New Format" feature is also used to select lines to be indexed and totaled. Push ALT-U to drop-down the Utility menu and use the scroll bar to highlight the "Set Up New Format" option. Then push ENTER to select it. Figure 23 shows the set up screen as it appears for a file that has not been set up previously. If you are modifying an existing format that format would be displayed on this screen. Let's start by looking at the F-key prompts at the bottom of the screen. At the lower left of the screen is a prompt that says, "F2 - [ TITLES ]". This prompt indicates the current mode the software is set for. There are four possible modes. These are: TITLES - allows you to enter or change line titles. LINE TGL - used to toggle lines on or off. INDEXING - this mode used to mark the lines that are to be indexed. You may index up to 11 lines, however we suggest that no more than five or six lines be indexed. Keep in mind that indexes use disk space and the more lines you index, the more space each entry will use on the disk. VALUE - used to mark the lines you want to have totalled. For example, if you are using a line to keep track of the value of items, you can mark that line so all the values are totalled. Each time you conduct a search or listing the total value of all items listed will be displayed (or printed on the report). Setting Line Titles To start setting up a new format set the F2 toggle to TITLES. There is a scroll bar that can be moved up and down along the left side of the screen. For a new format the default titles will be displayed. Please note that you can change 16 of the 21 line titles. The five line titles highlighted in green may not be changed. Move the scroll bar to a line you want to use and type the title for that line. You may enter up to 14 characters including letters, numbers, spaces and punctuation. If you make a mistake in typing a title, just highlight it with the scroll bar again and type the corrected title. ________________ORGANIZE YOUR COLLECTION - REFERENCE SECTION - 43 Titles do not have to be on consecutive lines. You can skip lines in order to create groups of lines. You can also have untitled lines. The LINE TGL determines whether that line will be a part of your catalog format. If you set a line to be on, that line will be part of the format regardless of whether it has a title. Line TGL Once you have put a title on each line you intend to use push F2 to switch to the LINE TGL (Line Toggle) mode. The software will now allow you to set which lines you want to include in your format. If you are starting a new format, the default setting will be to have all lines on. To turn a line off move the highlight bar to that line and push ENTER. Pushing ENTER again will turn that line back on again. Go through all of the lines using the scroll bar to highlight each line title and push ENTER to either turn the line on or off, depending on whether you want to use that line. When you turn a line on the software will display a bar that graphically shows the length of the line. The number of characters in each line will be shown in a highlighted section at the left side of each line (figure 23). NOTE: Line lengths can not be turned on or off once an entry has been saved in a catalog. You can change the titles, indexing and totalling at any time. If you need to change your format, to add or delete a line, after saving entries in a catalog, do the following. 1) Set up a new catalog format, using a different catalog name, that has the line set the way you need them. 2) Then use the copy feature to copy your entries from the old format to the new format. Setting Lines To Be Indexed Push F2 again to switch to the Indexing mode. To mark a line to be indexed move the scroll bar to that line and push the ENTER key. A "starburst" symbol will appear next to that line to indicate it will be indexed. To remove a line from being indexed move the scroll bar to that line and push the ENTER key. The "starburst" symbol will disappear. You may index as many lines as you wish, however I recommend you only index important lines. Each index uses additional space on ________________ORGANIZE YOUR COLLECTION - REFERENCE SECTION - 44 your disk. If you create a lot of indexes that you don't use, then you've wasted a lot of disk space. Totalling Values Once you've selected all of the lines to be indexed push F2 again to put the software into the Value mode. You can now move the scroll bar to any line and push the ENTER key to mark it as a line to be totaled. This will result in numerical values that are on the marked line being totaled during searches and listings. When entering information the value must be the only information on the line. If letters are included on the line being totaled they may cause the total to be incorrect. When you push F2 again the software will return to the Titles mode. You can then modify any of the titles or use the F2 toggle to change the mode and modify anything you've set up on this screen. When everything is set as you want it push F5 to save the format. This will return you to the Main Screen. You can modify a format anytime before you save the first entry. Just select the "Set Up New Format" option on the Utilities menu and make any required modifications. Once the first entry has been saved you only can change the line titles and the lines marked to be indexed or totaled. You can not change the line lengths. Take a look at figure 24. At the bottom of the screen is a status line that says "EST: 5,025 ENTRIES/MB". This is telling you that based on the current format you can store approximately 5,025 entries per megabyte of space. As you change the lengths of lines and the number of lines indexed this number will change. It can be used to give you a good idea of the amount of space your format uses. Copying A Catalog Format If you are creating a new catalog format that is similar to that of an existing catalog, you may find it easier to start by copying that existing format. To copy an existing catalog format start at the Main Screen and set the software so it is using the catalog name you want to copy. The catalog name you want to copy should be displayed in the center of the second line down from the top of the screen. Next select the Set Up Catalog Format option on the Utilities Menu. With the format set up screen displayed push F3 and then enter the name you want to use for the new format. The set up screen will change to the new name while retaining the old format. You may now modify the format or push F5 to save it. ________________ORGANIZE YOUR COLLECTION - REFERENCE SECTION - 45 Database Design Before we go on to the next item on the Utilities menu I'd like to talk a little bit about database design. When designing a database format there is the temptation use the longest lines available. However, this can waste a lot of disk space. In many cases you can select a line that has a shorter length and will handle 98% of everything you'll need to enter. Getting that last 2% is what will use a lot of disk space. Consider using abbreviations to shorten information that exceeds the length of a line. Another suggestion is that you should always include a line for miscellaneous information. Unless you're copying information from an established file (such as a card catalog or existing list) it is difficult to predict everything you might want to enter in the future. Having a miscellaneous line, even using one of the short lines, gives you the flexibility of having space to enter information you did not anticipate. Utilities Menu - Set Up Macro A macro is a way to enter complete lines of information with just a single ALT key combination. Using a macro ALT-key combination you can enter any pre-set information at the cursor location. First lets look at how to set up the information in the macros. Select the "Set Up Macro" option on the Utilities Menu. This will display a window in the middle of the screen as shown in figure 25. You can have up to 30 macros. The ALT-key combination that activates each macro is shown along the left side of the window. To set up a macro just type the information you want to be able to automatically enter in your database next to one the ALT-key designations. After typing each macro line push ENTER. When you are done entering macros push the ESC key. Macros can be changed at any time by returning to the screen shown in figure 25 and making whatever changes you need. When you're done push the ESC key to return to the Main Screen. I recommend leaving one of the macro lines blank, possibly the ALT-B line. This gives you a way to erase (blank) a line or part of a line when entering or editing an entry. For example, if you leave ALT-B blank you can place the cursor on the NAME line in a mailing list, push ALT-B and that line will be blanked. You ________________ORGANIZE YOUR COLLECTION - REFERENCE SECTION - 46 could also blank part of a line by putting the cursor anywhere on the line and pushing ALT-B. Everything from the cursor and to the right of the cursor will be erased. Utility Menu - Set Security Code This software provides a three level security system. Level 1 - provides access only to people who know the three digit access code. Level 2 - provides full access to anyone who knows the correct security code and read-only access to everyone else. With read- only access you can look up and read any of the entries, but you can not modify entries. With read-only access some selections on the drop-down menus, that would have allowed changes to be made, no longer appear on the menu. Figure 26 shows what the edit menu looks like when the software is set for read-only access. Level 2 security might be used in a library where only the librarian has access to change entries while patrons of the library have read-only access for looking up books and magazines. Level 3 - allows full access to anyone. To set a security code select the "Set Security Code" option on the Utilities menu. You will then be prompted to enter a three digit security code. If you enter a number between 001 and 250 the software will run at level one security. You will need to enter the correct security code number before getting access to the software. Entering a number from 251 to 500 provides level 2 security. If you enter the correct code you have full access. Entering any other number provides read-only access. Setting the security code to any number greater than 500 allows full, level 3, access to anyone. If you've set a security code that is 500 or lower, when the software first boots a screen with just a plus (+) symbol will appear. The cursor will be next to the plus symbol. Type your security code at this point and push ENTER. The security code is stored in the HOMECRAF.SET file. If this file should be erased, you will not be able to use the software. You will need to either replace the HOMECRAF.SET file using a backup copy or from your original disk, or use the RESET.EXE utility. ________________ORGANIZE YOUR COLLECTION - REFERENCE SECTION - 47 Another problem you might run into is forgetting your security code. Should this happen you can still get into the software once you have the registered version. On the registered disk you'll get from us we have provided a file called RESET.EXE. This utility serves as a "skeleton" key that will reset the security code to allow full access. To use RESET copy it to the same disk and directory that has the this software program. Run RESET and the security code will automatically be reset. This utility also resets all of the other settings to their defaults. Thus the software will be returned to monochrome operation and the default filename of CATALOG. If you are using the security feature be sure to put any disks containing RESET.EXE away in a safe place. The RESET.EXE utility is not provided on the shareware disk in order to prevent people whom you do not want to have access to your files from getting a copy of the RESET.EXE file. So please be careful if you are using the security feature in the shareware version of this software. Utilities Menu - Set Screen Colors this software will initially start running in the black & white mode. To switch it to color select "Set Screen Colors" on the Utilities menu. Five possible color settings will be displayed. Push a number, from 0 to 4, that indicates the color combination you want to use. (Generally #1 provides the best setting). You can go directly to the color selection screen by holding down the CTRL key and pushing the letter "A". Utilities Menu - Delete File If you are no longer using a file, it can be deleted using the "Delete File" option on the Utilities menu. Select "Delete File" and a listing of filenames will be displayed. Use the scroll bar to highlight the file you want to delete and push ENTER. If there are entries in the file the software will tell you how many entries it has (see figure 27) and ask you to confirm that this is the correct file to delete. ________________ORGANIZE YOUR COLLECTION - REFERENCE SECTION - 48 Utilities Menu - Select Filename The last selection on the Utilities menu allows you to select a filename or create a new catalog file. You can have as many catalog files as you wish, limited only by the limitations of the version of DOS you are using. When deciding on names for your catalogs you can not use numbers as a part of the catalog name. Numbers are used to identify the index files. Using a number in a catalog name might cause some confusion in the index files. Also, catalog names can not be longer than eight characters. Although you can create as many catalogs as you wish I recommend using as few as possible. Using multiple catalogs can become very confusing. In many cases you can enter all of your information in one catalog and let the software sort it out. This makes it a lot easier to find specific entries because you do not first have to figure out which file it is in. For example, for some people it may make sense to have separate personal and business catalogs. But, if your business serves several different industries do not make a separate catalogs for each industry. Use one catalog and include a line that allows that list to be sorted by industry. To change catalog names select "Select Catalog Name" on the Utilities menu. The existing catalogs will be shown in a box in the center of the screen. You can use the cursor keys to highlight a catalog or push ESC to enter a new catalog name. To use an existing catalog use the scroll bar to highlight it and then push ENTER. THE REPORT MENU The Report Menu allows you to select where a report will be sent (the printer, a disk file, the monitor, etc.). This menu is also used to design reports, set the report lengths and enter some of the final report design options. The Report Menu is shown in figure 28. Report Menu - Report Types (Send To option) There are seven types of reports available. These are: MONITOR: Displays the results of a search or listing one entry at a time on the monitor. The complete entry is displayed on the screen. ________________ORGANIZE YOUR COLLECTION - REFERENCE SECTION - 49 PRINTER - Continuous Paper: The results of a search or listing will be sent to your printer. This type of report is designed for printers with continuous feed paper such as dot matrix and laser printers. To send a report to the printer you first need to have designed a report format (which I'll discuss in a moment). The software comes with a standard format that will print everything in each entry. You can design your own report formats to look any way you want. PRINTER - Single Sheet Feed: This is the same type of report as the "PRINTER-Continuous Paper" report except that it is designed for printers that only handle one sheet of paper at a time. A daisy wheel printer would be an example of this type of printer. ASCII (document) File: You can save the results of a search or listing in a file on your disk. It will be stored as an ASCII text file which means it can be imported into any word processor. This allows you to include, for example, wanted lists in letters you send to other collectors. dBase File: Selecting this option will save the results of a search or listing in a dBase III file. This file can be used by any software that can read dBase III files. QUICK VIEW: This option puts the first 100 matches that result from a search or listing into a list that appears on the screen. You can then move a scroll bar through the list and pick individual entries to display. (Note: this feature requires the additional video memory that is normally only available with color monitors). The Quick View listing will only show information that is included in the first three lines. Based on this information you can then pick entries to look at in more detail. When the Quick View list is on the screen use the up/down cursor keys to move the scroll bar up and down. The PgDn and PgUp keys change the display by a complete page. The Home and End keys will take you directly to the beginning or end of the list. To get more detail on any entry use the scroll bar to highlight that entry and then push the ENTER key. You can return to the Quick View screen by pushing F2. With the Quick View screen displayed pushing the ESC key will exit from the Quick View function. ________________ORGANIZE YOUR COLLECTION - REFERENCE SECTION - 50 LABELS: The labels settings produces the same type of report as the "PRINTER-Continuous" report except that line feeds are not included. This setting should be used anytime you are printing continuous feed labels. Selecting Where You Want To Send Your Report (Send To) To select a report type use the scroll bar to highlight the "Send To" option on the Report Menu and push ENTER. This will open a window in the middle of the screen (see figure 29). All of the report types will be listed and there will be an "X" in the box next to Monitor. This indicates that the results of a search or listing will be displayed on the monitor. Push the TAB key to change the setting. Each time you press the TAB key the "X" will move to the next box changing and changing the setting. Press TAB until the software is set for the type of report you want to use and then press the ENTER key. Report Menu - Page Length The "Page Length" option allows you to set the number of lines that can be printed on a sheet of paper by your printer. For example, most dot matrix printers will print 66 lines per 11 inch page while laser printers print 60 lines per page. When you select this option a window will appear in the middle of the screen. The current page length will be displayed. You can then enter a new page length, which can be up to 999 lines. Report Menu - Dashed Line If you wish, you can have the software print a dashed line between each entry that is listed on a report. In some cases this helps to separate entries making them easier to read. The dashed line will also contain the entry number providing a means of determining which entry numbers are being printed. The "Dashed Line" selection on the Reports menu is a toggle. Highlighting the "Dashed Line" option and pushing ENTER will change the setting between on and off. The setting will be stored on the disk. Once set it will not change until you use this toggle again. Report Menu - Column Headings You can have column headings printed at the top of the page. The line titles you've set-up will be used as the column headings. ________________ORGANIZE YOUR COLLECTION - REFERENCE SECTION - 51 With the "Column Headings" option toggled "On" they will be printed using the same format as you've set up for the printed report. This option is a toggle. When you highlight the "Column Headings" menu selection and push ENTER the setting will be toggled between on and off. A typical use for column headings is with single line reports. You can set up a report format that prints all of the information on a single line (up to 250 characters wide - set your printer to use condensed print to get more characters per line). What you'll get using this type of format are columns of information with an identifying title at the top of each column. Report Menu - Set Up Report Format This software allows you to design your reports to look any way you want them to. You can include just the lines of information you want and design reports that print small labels or full sized reports. The "Set Up Report Format" option on the Reports menu brings up the screen used to design a report format. You may design and use as many different report formats as you wish, giving each format its own name. Figure 30 shows the screen used for designing a report. This is what the screen looks like before starting to design a report. Let's start by looking at the F-key prompts at the bottom of the screen. The first F-key prompt you'll need to use is "F6 - RPRT LENGTH" The F6 key is used to set the length of the report. Please note this is different from the page length that is set on the Report menu. The report length is the number of lines used to print the information about one entry. A report can have from one line up to 21 lines. There are two bars that graphically show the report length. The top bar contains the screen title and cursor position indicator. The lower bar is a solid line. Push F6 and a blank space will appear in the brackets next to the RPRT LENGTH prompt. Enter the number of lines you want to use to print each entry. The lower bar will then drop down to show the size of the report. Figure 30 shows the lower bar set for the minimum report length, one line. Entering 21 as a length will ________________ORGANIZE YOUR COLLECTION - REFERENCE SECTION - 52 place the lower bar at the bottom of the screen. We'll look at an example of a report set for six lines (figure 31). The F2 key is used to select the line you want to put on the report. Each time you push F2 the line name in the brackets will change. In addition to the title of the line the length of the line is also shown. In figure 30 it is set for the LAST NAME line which is 15 characters long. The F3 key is used to place a line on the report. Use the cursor keys to move the cursor to the location where you wish to place a line. Notice that a counter in the upper right corner gives the row and column where the cursor is located. When you push the F3 key the line shown in the brackets next to the F2 prompt will be placed on the report at the cursor location. If you try to place a line in a location that would result in two lines overlapping, your computer will beep and the placement of the line will not be accepted. You can relocate a line you've already placed by pushing the F2 key until the name of the line you want to replace is in the brackets next to the F2 prompt, positioning the cursor at the new location and then pushing F3. The screen can only show reports that are 80 characters wide, however you can set up and print reports that are up to 250 characters wide. As you place lines at locations that go beyond the 80 character width of your screen the display will scroll to the left in 40 character increments. You can move the cursor forty characters to the left or right by holding down the CTRL key and pushing the left or right cursor keys. (Watch the column numbers in the upper right corner). Figure 31 shows what the screen looks like after five lines have be placed. The asterisks after each line name show the amount of space the line will use when printed. To make things fit better you can shorten the length of the lines to be printed. For example, if you only wanted to include the first 15 characters of the company name push F2 until the COMPANY line title is shown in the brackets. Then push F4. The F4 key is used to change the length of any line. When you push F4 the line length number within the F2 brackets will be replaced by a blank space. You can then enter a new line length. If you place a line on the report and then decide that you don't want to include it in the report, use the F2 key to put the line name in the brackets. Then push F9. The F9 key is used to delete a line from the report. ________________ORGANIZE YOUR COLLECTION - REFERENCE SECTION - 53 Once you have a report designed the way you want it to be push F5 to save it. You can save as many different report formats as you'd like, giving a different format name to each. The F7 key allows you to select the format name of an existing report or assign a name to a new report format. For example, in figure 33 I have changed the format name to bring up the STANDARD report format for a mailing list. (This format is supplied with the software). To return to the Main Screen push F10 (or the ESC key). Report Menu - Report Format You can also change report names using the "Report Format" option on the Report menu. The current setting for the report format will be shown in brackets next to this menu item. When you select this option a box will appear that shows all of the format names currently used. You can select one by highlighting it with the scroll bar and pushing ENTER. You may also push the ESC key to enter a new format name. Please note that if you have the software set to use a format name for which no format has been defined, your printed reports will be blank. Printing A Report Here are the steps you would follow to print a report: 1) Design and save the report format you want to use. This needs to be done only one time. Once a report format has been saved it is available whenever you needed it. 2a) If you are searching for something, enter the search criteria on the appropriate line(s). 2b) If you wish to list your catalog in alphabetical order, move the cursor to the line you wish the alphabetical order to be based on. This line must be marked with a starburst symbol. 3) Push ALT-R for the Report Menu. The highlight bar will be on the "Send To" option. Push ENTER. A window displaying report options will open in the middle of the screen. Most people will want to use the CONTINUOUS PAPER setting, so push ENTER once to move the "X" to that setting. If you want to pause after each page is printed, put the "X" next to SINGLE SHT. FEED. ________________ORGANIZE YOUR COLLECTION - REFERENCE SECTION - 54 4) Push ESC to close the window and return to the Report Menu. 5) Check the Dashed Line, Column Headings and Lock Top Line settings to be sure they are set the way you want them to be. 6) Push the left cursor key until the Search Menu is displayed. Highlight the search option you want to use and push ENTER. A prompt will now appear, at the bottom of the screen, asking for a title for this report. You can enter anything you like as a title as long as the number of characters in the title does not exceed 80 characters or the width of your report format, whichever is greater. If you push ENTER at this point, without entering a title, the software will put a default title on your report. If you do not want any title at all, push the space bar and then push ENTER. Your report will now start printing. I have taken you through printing a report in a step-by-step detailed manner. Once you have become familiar with using this software you can skip some of these steps and use the short cut keys. For example, if you've already printed one report you can print a second simply by entering your search criteria and pushing F6 (or F8). EXIT MENU You can drop-down the eXit menu by either pushing ALT-X or by pushing the ESC key. The eXit menu provides three options. The first is "Exit Program" and selecting this returns you to the DOS prompt (or a DOS shell program, if you are using one). You should always exit from this software before turning off your computer. Turning off your computer while any program is still running can result in the partial loss of data should that data still be in your computer's internal buffers. Backing Up Your Catalog Entering the information about your collection takes a lot of time and it's not something most people want to do twice. That's why maintaining current backup copies of all your catalog files is very important. The second selection on the Exit Menu provides a limited, but effective way to backup your catalog files. Please note, this utility is not intended to be a complete hard disk backup system. I strongly recommend that you purchase ________________ORGANIZE YOUR COLLECTION - REFERENCE SECTION - 55 software such as PC Tools, Fastback, or any of the many other backup utilities available. We are only including this utility because a large number of users create catalogs having several thousand entries and then lose them when their computers encounter a hard disk problem. This utility is only intended to provide something you can use while your catalog is small and until you can purchase a normal backup utility program. The backup utility will backup the current catalog in use. The name of this catalog is displayed as a part of the Main Screen in the middle of the status line (second line down from the top). Each catalog must be backed up separately. To use the backup utility select "Backup" on the Exit Menu. Read the first screen that appears and then push ENTER. When the next screen appears you can push "E" to exit, "B" to start a backup, or "R" to recover backup copies from a floppy disk. On the next screen push the letter that identifies the disk drive containing the backup floppy disk. You should start your backup using a blank formatted disk and use a separate disk for each catalog. I suggest keeping a set of three backup disks for each catalog. Rotate through this set always using the oldest one for the current backup. That way, if your current backup should turn out to be a backup copy of files that have already been damaged (it happens a lot), you can go back to an older copy and still recover most of your catalog. Note: you do not need to erase or reformat backup floppies before using them a second, third, forth, etc. time for the same catalog. If the backup floppy is always used for the same catalog, the backup process will erase the previous backup copy. You only need to start with a blank floppy the first time that disk is used. You can recover a backup copy by following essentially the same sequence of steps. Just push "R" for recover instead of "B" for backup on the appropriate screen. NOTE: When files are being recovered the utility will not allow a file with an older date to overwrite a more recent file. If you have lost a catalog and in looking for it have created another catalog using the same name, the more recent catalog will have to be erased before the backup utility will copy the old files to your disk. There is a selection of the Utilities Menu that is used to delete catalogs. The backup utility uses an archiving utility called LHA. This utility was written by Yoshi and is copyrighted 1991 by Yoshi. ________________ORGANIZE YOUR COLLECTION - REFERENCE SECTION - 56 The documentation for this utility is included on the disk in a text file called LHA.DOC. The final option on the Exit Menu is "Shell To DOS." The "Shell To DOS" option gets you to the DOS prompt without exiting the program. this software remains in your computer's memory and you can return to where you left off by typing the word EXIT at the DOS prompt. You might use the "Shell To DOS" option, for example, to use the DOS directory (DIR) command to check for files on your disk or to format a floppy disk. HELP MENU this software includes a series of help screens that have key information about the main functions. Push ALT-H to drop-down the Help Menu. Then use the scroll bar to select the topic you want information on. RETURN The final selection only appears at the top of the screen when a drop-down menu is displayed. The Return selection removes the drop-down menus from the screen and returns you to the Main Screen. You can also return to the Main Screen by pushing the ESC key. ________________________________________ORGANIZE YOUR PLANTS - 57 ORGANIZE! YOUR PLANTS, YARD & GARDEN ORGANIZE! YOUR PLANTS is designed to help you keep track of the plants you have, where they are located, their characteristics, the care they require, and how they are propagated. It is ideal for maintaining an easy-to-update record of what you have in your yard, garden or greenhouse. The filename for default catalog is: PLANTS The following are descriptions of what each line was designed to catalog. You are not limited to this information. You can enter anything on any line and ORGANIZE! Your Plants will be able to conduct correct searches and sorts. The number in parenthesis shows the number of spaces available on that line. TYPE (20) - Enter a word or short phrase that describes the general category this plant is in. Typical types would be: tree, shrub, hedge, roses, bulb, water plant, fern, bonsai, herb, etc. COMMON NAME (20) - Use this line for the common name of the plant. Some examples of common names for some well know annuals are: carnation, dusty miller and marigold. BOTANICAL NAME (30) - The botanical names for the three annuals listed above are: Dianthus caryophyllus, Senecio cineraria and Tagetes tenuifolia pumila. VARIETY (30) - This line is used for either the species name or variety name of the plant. DESCRIPTION (64) - Use this line for a short description of the plant's characteristics. There are lines available for describing the size, flowers and color, so use this line for describing other characteristics of the plant. Keep in mind that a full screen memo is available (push PgDn) for a detailed description, so just put keywords or a short description of the most important characteristics (you would most likely be searching for in the future) on this line. LOCATION (64) - Describe where this plant is located. For landscaping be sure your description of the location is detailed enough so that you will know what it means in 5 or 6 years. Do ________________________________________ORGANIZE YOUR PLANTS - 58 not tie the location of a plant to a object that might be relocated in a few years. Specify approximate distances (and directions, eg. north, south, south-east, etc.) from permanent objects such as the corner of a building or the boundary of your property. SIZE (20) - Enter the fully grown height and spread (when appropriate) of this plant. FLOWERS (40) - If this is a flowering plant put a short description of the flowers and the time of year when they appear. If you want to have a detailed description of the flowers, use the full screen memo. COLOR (40) - Enter the color of the flowers. If this plant is not a flowering plant, you can use this line for recording any other colors such as fall leave colors, bark color, etc. CARE (2 lines of 60 characters each) - Describe the care the plant requires. The next two lines also cover care instructions for light and watering, but all other care instructions should go on these two lines. Key information about such subjects as fertilizing, insect sprays, aerating, potting, temperatures, etc. should be entered here. LIGHT (20) - Use this line to describe the amount of light this plant should receive. WATERING (20 - Describe the frequency and amount of water this plant requires. GROWTH RECORD (30) - If you'd like to keep track of how well this plant is progressing, use this line to keep a growth record. For example, for a tree you might record its height for the past five years. NOTE/RATING (40) - This line is provided for miscellaneous notes and for cataloging the rating assigned by a society (if applicable). For example, the American Rhododendron Society assigns ratings that indicate the overall quality of each type of rhododendron. It is a two part number such as 2/5. The first number shows the quality of the flower (on a scale of one to five) and the second number refers to the rest of the plant (also on a scale of one to five). PROPAGATION (64) - Describe how this plant propagates and any care it requires to help it propagate. For example, "divide bulbs when the become crowded." ________________________________________ORGANIZE YOUR PLANTS - 59 PROBLEMS (64) - Describe any problems you have had with this plant and how the problem was successfully resolved. If this plant has had serious problems, you may want to put the details on the memo screen. A typical entry on this line might be: "aphids, spray with malathion every spring." WHEN PLANTED (20) - For trees and shrubs entering the year is appropriate. For annuals and biennials I'd suggest entering the month you normally plant them. For vegetables, enter the month you normally plant them. PLANTING (64) - A brief description of the planting instructions. More detailed planting instructions can be entered on the memo screen or you can use this line to refer to a specific page in a book or notebook. PURCHASED (50) - From whom did you purchase these plants and in some cases it might be appropriate to enter the date they were purchased. COMMENT (64) - This line is used for miscellaneous information or comments. As with any of the other lines you can change the title of this line and use it for anything you wish. Overall the design of the above categories has been very generic in nature in order to make this software appropriate for a wide variety of plants. Everyone has different requirements and you may need to change the names of some of the lines to adapt this software to meet your specific needs. At HomeCraft we are always working to make our software better and we hope to have a more flexible version, with user definable line lengths, available later in 1992. So if this software does not do exactly what you need, please contact us for information about new releases. ____________________________________ORGANIZE YOUR COLLECTION - 60 Appendix A - Other Software Published By HomeCraft Appendix B - Solving Problems Appendix C - Filenames used by this software Appendix D - Using DOS Appendix E - Site license _________________________ORGANIZE YOUR COLLECTION APPENDIX A - 61 APPENDIX A - OTHER SOFTWARE HomeCraft publishes a complete series of programs for cataloging various types of collections. Each program has been designed based on HomeCraft's extensive experience publishing specialized database software. They make setting up a catalog for a specific type of inventory or collection easy - leaving you to just select what you want to do and fill in the blanks. HomeCraft's experience with cataloging collections helps you get started quickly. Our extensive experience and large base of users means that more experience and feedback has gone into the design of each program than any one individual could provide. We listen to our users and change our software to accommodate your suggestions. This can be very valuable to you because other users may have thought of ways to set up their catalogs that may not immediately be apparent to you. We currently offer software to catalog the following types of collections: Professional Series: (to be released during May 1992) Mailing List Manager Home/Office Inventory - now available! For Photographers (catalog slides, prints and negatives) - now available! Professional Book Minder (books, periodicals and papers) - now available! Client Contact List Parts List (Bill of Material) Project (tickler) File Employee Records System Supplier/Vendor Contacts Regulatory Database Collectors Series - All of the following are now available: Organize Your Record/CD/Tapes (pop, country and rock) Organize Your Classical Music Organize Your Record/CD/Tapes (jazz version) Organize Your Books and Magazines Organize Your Film & Video Tapes (TV shows, movies and family videos) _________________________ORGANIZE YOUR COLLECTION APPENDIX A - 62 Organize Your Sports Cards (baseball, football, hockey cards, car racing, etc.) Organize Your Gun Collection Organize Your Coin Collection Organize Your Stamp Collection Organize Your Home (Home Inventory) Organize Your Comic Book Collection Organize Your Art Collection Organize Your Antique Documents Organize Your Memorabilia Collection Coming soon! Organize Model Railroads Organize Your Fabrics & Patterns Organize Your Business Card Collection plus more on the way! If you are a registered user of any HomeCraft program you may purchase any or all of the above programs for $25.00 each. Please add $4.00 for shipping and handling to your order ($8.00 for air mail shipment outside North America). They are available directly from: H.C.P. Services, Inc., P.O. Box 974, Tualatin, OR 97062. Please be sure to specify the disk size you need (3-1/2" or 5-1/4") and don't forget to include your name and address. We accept VISA and Master Card. Pre-entered Data We are working on establishing databases of pre-entered data for various types of collections. We currently offer over 1.5 megabytes of pre-entered baseball cards for use with this software. We are now working on building pre-entered databases for stamp, coin, movie and CD (music) collections. Baseball Cards If you'd like to avoid a lot of typing you may purchase a disk containing a catalog of Topps cards for the years 1978 through 1990 and the years 1955 through 1961. These files provide over 1.5 megabytes of data. The cost is $25.00. However, these files are provided free if you register the ORGANIZE YOUR SPORTS CARDS software before 12/31/92. _________________________ORGANIZE YOUR COLLECTION APPENDIX A - 63 We are working to add other years. Please feel free to contact us for more information concerning additional years and card manufacturers. In some cases you may find a flyer, describing the current status of new data files, included with this manual. _________________________ORGANIZE YOUR COLLECTION APPENDIX B - 64 APPENDIX B - PROBLEM SOLVING This section describes some of the errors and problems other users have encountered and recommends solutions. In most cases the software will detect problems, diagnose them and put a message on the screen. Permission Denied - this is a DOS error message. It means that you are using a disk that is write protected. Remove the write protection and the problem will be solved. This problem might also be caused by a directory that is full. You can have a full directory even if there is space available on your disk. Depending on the version of DOS you have there is a limit on the number of files you can have in a directory. In most cases this limit is 128 files. If you try to create more than 128 files you may get the "Permission Denied" error message. Unable To Change The Length Of A Line - If you want to change the length of a line in your catalog format, but the prompt for the line lengths does not appear on the Catalog Format Set Up screen, then the software is telling you that at least one entry has already been saved. Once an entry has been saved the length of the lines can not be changed. this software uses what is called a fixed length random access data file. This allows entries to be found very quickly, but it means that if you change the lengths of any of the lines the software will no longer be able to read the data file. Thus, the software will not allow you to change the length of a line after an entry has been saved. If you need to change your catalog format after saving an entry you can do this by creating a new catalog format with the line lengths you want. Then use the copy feature to copy the entries from your old format to the new format. Once all of the entries have been copied (use the editor to see that they are correctly copied) the old catalog can be deleted. There is a Utility Menu option that is used to delete catalogs. _________________________ORGANIZE YOUR COLLECTION APPENDIX B - 65 The Software Won't Start - if when you type OYC the software does not start there are several possibilities: 1. If you get a message that says "Bad Command or Filename" then your computer can not find the OYC.EXE file. Be sure you are in the directory that contains the OYC.EXE file. To do this type DIR *.EXE and check to see that OYC.EXE is listed in the directory. If it is not listed you most likely will need to use the DOS CD command to change to the correct directory. 2. If nothing happens or your computer locks up when you type OYC, you may have fragmented or cross linked files. Please see the section which discusses fragmented files. All Data Files Have Disappeared - I've had many people call me with this problem. Yesterday they were typing entry 4000 and today the software says they are on entry #1. What happened? Usually the cause of this problem is that the database filename has been changed. All 4000 entries still exist, they are just stored using a different filename than the current filename. In many cases the two filenames may be very similar such as PHOTO and PHOTOS. Its easy to get them mixed up, so be sure you are using the right filename. The Software Can't Find A Database Filename You Know Exists - in addition to the filename you can also set a PATH. This allows you to store data in other directories. If you are looking for a database file that is stored in a different directory, you will need to specify the PATH to that directory as a part of the filename. I generally recommend you keep all of your database files in the same directory as the OYC.EXE file. This makes it easier to keep track of what these files are used for and which program they go with. Fragmented Files - there is no error message that will tell you that your computer has fragmented files. Fragmented files are a normal result of using a computer. When a computer stores information on a disk it puts it into the next available sector on the disk. The next available sector may not be physically located anywhere near the previous sectors the computer was using. As you add to a data file it tends to be broken into small pieces that are scattered in various sectors all over the disk. The problem with fragmented files is that they slow down your computer because it takes more time for the heads in your disk _________________________ORGANIZE YOUR COLLECTION APPENDIX B - 66 drive to move from piece to piece of a file that is scattered all over a disk. With serious file fragmentation the computer can actually lose track of pieces of a file or start to get cross linked files. As a result the computer can become "confused" and lock-up, you might start getting strange results for searches or be unable to access some entries. If your computer was working fine yesterday and today seems to be giving you strange results and problems, the cause may be the result of fragmented files. I've seen all kinds of problems the range from software locking up to files becoming inaccessible. To solve and prevent this problem you'll need utility software such as PC Tools or the Norton Utilities. Both of these programs provide file de-fragmentation. You should defragment your hard disk on a regular basis. I've found my computer can get fragmented files after just one day of use (one day of use for me is probably a lot for someone else). In most cases you should perform preventive maintenance by defragmenting your hard disk after every 50 to 100 hours of use. An Asterisks Appears When The Software Is Started - If when you boot this software you get a blank screen with just an asterisks, then the security feature is activated. If you are unable to get past that screen, then you will need to use the RESET.EXE utility to regain access to this software. RESET.EXE is provided on the original this software disk. Because it serves as a generic key that will "open" the software, the install procedure leaves it on the original disk where other people can not use it. To use RESET.EXE you can copy it to the directory containing the this software (if you are not concerned about security). It may also be run from the original floppy disk. If you run it from a floppy disk, first set your computer so that the directory containing this software is the current directory on your hard drive. Get the DOS prompt for the disk drive where RESET.EXE is located. Type RESET. The utility will ask you to push the letter that identifies your hard disk. The utility will then reset the security function. NOTE: For more information on using DOS, see appendix E. _________________________ORGANIZE YOUR COLLECTION APPENDIX C - 67 APPENDIX C - FILE NAMES This software uses file naming standards such that each catalog will have a set of files with the same basic filename and various filename extensions. A filename extension is the three letter "code" the follows the eight (or fewer) letter filename. For example, in OYC.EXE the filename extension is EXE. This indicates this is an executable program file that the software can run. See appendix E for more information on filename extensions. When you first receive your this software disk the main program files are stored in a compressed format in an archive file called ORGANIZE.LZH. The files which are archived in ORGANIZE.LZH are: OYC.EXE - the main program file. HOMECRAF.SET - contains the basic configuration settings such as the current database filename, the security code and the display color setting. BRUN30.EXE - a support file required for the software to run. HOMECRAF.HLP - contains help information and error messages used by the software. CONVERT.EXE - a utility that converts data from versions of HomeCraft's collector's software released prior to version 5. MAIL*.* - there are set of files containing MAIL in their filenames. These are the sample mailing list manager files. When used in a filename an asterisk is a wildcard. Thus MAIL*.* identifies are filenames that start with "MAIL" and which can have any filename extension. This would include MAIL.DAT, MAIL.SET and MAILXX01.NDX. The files in ORGANIZE.LZH are all that are required to use the software. If you want to use the software without using the installation utility, all you need to do is de-archive these files and copy them to where-ever you want to use this software. _________________________ORGANIZE YOUR COLLECTION APPENDIX C - 68 The LHA.EXE utility is used to de-archive files. To de-archive the files type: LHA E ORGANIZE The letter "E" tells LHA to extract the files from the ORGANIZE file. You will need to have copied both LHA.EXE and ORGANIZE.LZH to a disk with at least 300K of space available (after copying these two files to it). Other files that you'll find on the disk include: RESET.EXE - resets the HOMECRAF.SET file to its default settings. This ius a utility used to open the software should you be using the security codes and you've forgotten your code. INSTALL.EXE - the utility for installing this software. CONFIG.OYC - a generic configuration file. This file is provided for computers on which there is no CONFIG.SYS file. This file will need to be renamed as CONFIG.SYS before it can be used. LHA.EXE, LHA.DOC and LHA.HLP - these three files make up the compression utility used by the catalog backup feature. LHA.DOC contains the documentation for using LHA.EXE. This utility may be used to compress and archive any files. It is not limited to the files used by this software. Any other files on the disk are files created by this software or format files. These files will all use the filename you select and add a filename extension that indicates the file's function. For example, if the filename is CATALOG the following files will be used (or created if they do not already exist). CATALOG.DAT - contains the information you've typed in your catalog. The DAT files are all ASCII files. This means that in an emergency you could read a this software DAT file using word processing software. CATALOG.SET - contains the settings associated with the specific file. These settings include the identification of the lines to be indexed or totaled. This file should always stay on the same disk and in the same directory as the DAT file. CATALOG.MCR - contains the information for any macros that have been set up. _________________________ORGANIZE YOUR COLLECTION APPENDIX C - 69 CATALOG.FMT - any filename ending with "FMT" contains the specifications for a printed report format. CATALOG.DBF - the letters "DBF" are used by dBase to indicate a dBase data file. Files with a "DBF" filename extension will be created if you export a file to a file in dBase format. If you want to import a dBase file, that file must have a filename extension of DBF. CATALOG.MEM - the letters MEM indicate that this is the file containing the memos attached to entries in the data file of the same name. If this file is erased the software will try to automatically recover it. If you want to erase the memos, please use the Remove Memo option on the Reports Menu. Using the Remove Memo feature will not erase the MEM file. If you want to erase the MEM file, first Remove all of the memos then use the DOS DEL command to erase the file. _________________________ORGANIZE YOUR COLLECTION APPENDIX D - 70 APPENDIX D - USING DOS It is becoming more and more common to find either Windows 3.0 or a DOS shell installed on a computer in the factory. This means that most people do not see a DOS prompt (which looks something like C:\>) when they turn on their computers. Is it important to know how to work at the DOS prompt? Well, the problem is that the DOS prompt provides the only common language for owners of different IBM compatible computers. Each DOS shell and Windows 3.0 use different terminology and methods for accomplishing things. The only way we can communicate with each other is to talk about how things are done at the DOS prompt. Working at the DOS prompt is not difficult. Once you learn a little bit most people find it to be easier and quicker to work at the DOS prompt than to work through a DOS shell or menu program. However, it is not necessary that you learn how to work at the DOS prompt. You can use this software and most other application programs without ever seeing the DOS prompt. The DOS Prompt The DOS prompt is sometimes also called the command line. It is where you type the DOS commands used to have your computer perform numerous utility functions. The DOS prompt can contain a variety of characters. In general it consists of a letter that designates the current disk drive. For a hard disk this is usually the letter "C". Drive letter designations are usually followed by a colon, so that C: represents the "C" drive. In many cases the DOS prompt will also identify the current directory. So before we go any further, let's talk about directories. Directories Directories are usually described as being like a tree. That's how the ROOT directory got its name. Like the roots of a tree, it is where all of the rest of the directories are based. However, I like to think of directories as if they were rooms in an office building. ________________________ORGANIZE YOUR COLLECTION APPENDIX D - 71 When you enter an office building you usually enter through the lobby. In order to get to any of the offices in the building you need to go through the lobby. It's the same for the root directory, which is like the lobby of any office building. To get to any of the other directories on a disk you need to go through the root directory. Once inside the building you would go to the reception area for the suite of offices used by the company you want to visit. This reception area is like a directory on your disk. If the company is a small one, there may be no additional offices and all of the work takes place in the "reception" area. Bigger companies will have a suite of offices, just like bigger programs will have sub- directories branching off from the directory. Thus, if you need to pick up a file in your friend Bob's office, you would go through the lobby, through Bob's company's reception area, and into Bob's office where you would find the file. The directories on your hard disk work the same way. If you are looking for a file you start at the root directory, which is indicated by a backslash (\). You would then go to the "RECEPTION" directory, which has "Bob's Office" as a subdirectory in which you would find the file you are looking for. This is called following a PATH to the file. The description of the PATH in a computer is written in a "shorthand notation" that uses backslashes to separate each directory on the path. The path I have been describing would look like: \RECEPTION\OFFICE\FILENAME | | | | | | | |- the file you are looking for | | |- the subdirectory | |- the directory |- the root directory The first backslash on the left always indicates the root (lobby) directory. Then we go through RECEPTION and OFFICE to reach the file we want. The word "RECEPTION" is not misspelled in the path description. Directory names can only be a maximum of eight characters long. That's why it was necessary to drop one of the characters in "RECEPTION." Why all this discussion about paths and directories and subdirectories? Because many times the DOS prompt includes a description of the path to the current directory. That way you _________________________ORGANIZE YOUR COLLECTION APPENDIX D - 72 can always tell where you are on the disk. For example, the DOS prompt could look like: C:\RECEPTON\OFFICE> If you wanted to run a program that was in the OFFICE subdirectory of the RECEPTON directory and you DOS prompt looked like C:\>, then you know you are in the root directory and can not run that program. You first need to change to the directory (or subdirectory) containing the program you want to run. You do that by typing CD followed by the name of the directory and subdirectories you want to go to. CD stands for Change Directory. To go to the OFFICE subdirectory you would type: CD \RECEPTON\OFFICE Typing Commands Anytime you want your computer do something, such as run a program, you would type the appropriate command at the DOS prompt and push ENTER. When you type a command you are generally typing the program's filename. So before we go any further let's talk a little bit about filenames. Getting To The DOS Prompt The first step is to get the DOS prompt on your screen. That way you see listings of the filenames on your disk and find out what you have on your disk. If your computer does not display the DOS prompt when you first turn it on, it is most likely running a DOS shell or Windows 3.0. You will need to read your manuals to find out how to exit the shell and get to the DOS prompt. In some cases you can just push the ESC key or the F10 key. In other cases an ALT key combination, such as ALT-F9 is required. With other shells there is a drop down "FILES" menu that has an exit option. They are all different, so I'll have to let you find out how to get to the DOS prompt on your own. Filenames Filenames have two parts. The filename itself and the filename extension. I'll explain what this means by using an example. Filenames can be shown in many ways. Here are some examples: _________________________ORGANIZE YOUR COLLECTION APPENDIX D - 73 PROGRAM.EXE PROGRAM EXE PROGRAM EXE If the above examples "PROGRAM" is the filename and "EXE" is the filename extension. The filename can be up to eight characters long and may include letters and numbers. Filenames may not include spaces. The filename extension can be up to three characters and is usually used to indicated they type of file. Some common filename extensions and their definitions are: EXE - executable file. These are program files that can be run. COM - Command file. This is essentially the same type of file as an EXE file. BAT - Batch file. A text file that contains a series of instructions to be executed by the computer. You can see the contents of a batch file by entering TYPE FILENAME.BAT at the DOS prompt. The "TYPE" command will list the contents of a text file on the screen and a batch file is nothing more than a text file containing a series of DOS commands. The above three types of files are the only ones that will run. You can type the filename of any file that has an EXE, COM or BAT filename extension and that file will generally run a program. If you type the filename of any of the following types of files, nothing will happen. DAT - data file. The information in your catalog will be stored in a data file. NDX - index file. TXT - Text file. Text files contain written information stored in ASCII format. ASCII is a standard code that all computers use. Thus in ASCII the letter "A" is stored in the same way on all computers. You can see the contents of a TXT file by entering TYPE FILENAME.TXT at the DOS prompt. _________________________ORGANIZE YOUR COLLECTION APPENDIX D - 74 DOC - Document file. This may or may not be a text file. Document files contain written information just like a text file. But, in addition, they may also contain formatting codes and other non-text information. Depending on the type of software used to create the document file, letters of the alphabet may be stored using a code system that can only be read by a limited number of programs. In many cases though, document files and text files are the same. SYS - System file. These are files used by your computer system to perform specialized functions. Using The DIR Command You can see a listing of the files in the current directory by typing DIR at the DOS prompt and pushing ENTER. If there are more than about 20 files the list will scroll off the top of the screen. To get the directory listing to pause when the screen is full type DIR /P and push ENTER. The DIR command is called a DOS internal command. You will not find a file called DIR on your disk. DOS has a number of commands that are built into it and are always in the computer's memory. You can use these commands anytime you are at the DOS prompt. It does not matter which drive is the current drive or what directory you are in. If you want to narrow down the listing produced by entering DIR so you can more easily spot the file you are looking for, you can enter parameters after the DIR command. For example, you can list just the files with EXE as a filename extension by typing: DIR *.EXE The asterisk is used as a wildcard. The above example tells the DIR command to list all filenames that have a filename extension of EXE. You could list just the files that start with the letter "G" by typing: DIR G*.* _________________________ORGANIZE YOUR COLLECTION APPENDIX D - 75 Copying Files One of the most useful DOS commands is the COPY command. The COPY command is used to copy a file from one location to another. You can copy a file from one disk drive to a different disk drive. Or you can copy a file from one directory to another directory. The basic syntax of the COPY command is: COPY source filename destination filename If they are not in the current directory or on the current drive the source and destination filenames must contain the PATH description that identifies where the file is located. Let's assume your computer is set for the directory containing your this software files and that the original this software disk is in the "A" floppy disk drive. To copy the two files containing the default format for cataloging books to your hard disk you would type: C:\ORGANIZE>COPY A:BOOKS.DAT C:\ORGANIZE>COPY A:BOOKS.SET Since the DOS prompt contains "ORGANIZE" we know we are in the ORGANIZE directory and thus a destination directory does not need to be specified. If we wanted to copy the BOOKS.DAT file from the "C" drive to a disk in the "A" drive we would type: C:\ORGANIZE>COPY BOOKS.DAT A: This specifies that BOOKS.DAT is to be copied from the current directory on the "C" drive to the current directory on the "A" drive. We could also copy both of the BOOKS files with one command by using a wildcard: C:\ORGANIZE>COPY BOOKS.* A: I hope this brief introduction to DOS has been some help. For more information on using DOS I suggest picking up a copy of a beginning level book about DOS. One that I can recommend is Simply DOS by Kris Jamsa published by Osborne/McGraw-Hill. ____________________ORGANIZE YOUR COLLECTION - SITE LICENSES - 76 APPENDIX E - SITE LICENSES HCP Services, Inc. HomeCraft Software Site License Agreement If you intend to use this software on more than one computer a site license is required. A site license allows internal use and copying of the software for as many sites/computers as contracted for. An unlimited site license allows unlimited copying of the software for internal use only. This is copyrighted software and any distribution or reselling of the software to third parties is not allowed. HCP Services, Inc. grants ____________________________ a site license for the use of the following software program(s): This is a perpetual license for the use of the software within your company or organization, and is not transferable. This site license allows internal use and copying of the software for use by/on ______ users/computers. HCP Services will provide technical support for one year of the date of this agreement to one person, designated as the key contact within your company or organization. HCP Services, Inc. warrants that it is the sole owner of the software and has full power and authority to grant the site license without the consent of any other party. HCP SERVICES INC. DISCLAIMS ALL WARRANTIES RELATING TO THIS SOFTWARE, WHETHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, AND ALL SUCH WARRANTIES ARE EXPRESSLY AND SPECIFICALLY DISCLAIMED. NEITHER HCP SERVICES, INC. NOR ANYONE ELSE WHO HAS BEEN INVOLVED IN THE CREATION, PRODUCTION, OR DELIVERY OF THIS SOFTWARE SHALL BE LIABLE FOR ANY DIRECT, INDIRECT, CONSEQUENTIAL, OR INCIDENTAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE SUCH SOFTWARE EVEN IF HCP SERVICES, INC. HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR CLAIMS. IN NO EVENT SHALL HCP SERVICES, INC.'s LIABILITY FOR ANY DAMAGES EVER EXCEED THE PRICE PAID FOR THE LICENSE TO USE THE SOFTWARE, REGARDLESS OF THE FORM OF CLAIM. THE PERSON USING THE SOFTWARE BEARS ALL RISK AS TO THE QUALITY AND PERFORMANCE OF THE SOFTWARE. ____________________ORGANIZE YOUR COLLECTION - SITE LICENSES - 77 This agreement shall be governed by the laws of the State of Oregon and shall inure to the benefit of HCP Services, Inc. and any successors, administrators, heirs and assigns. Any action or proceeding brought by either party against the other arising out of or related to this agreement shall be brought only in a STATE or FEDERAL COURT of competent jurisdiction located in Multnomah County, Oregon. The parties hereby consent to in personam jurisdiction of said courts. Company: Address: City: State/Prov: Zip: Country: Phone: Authorized Signature Print or Type Name Title Date Steven C. Hudgik President HCP Services, Inc. Authorized Signature ____________________ORGANIZE YOUR COLLECTION - SITE LICENSES - 78 HCP Services, Inc. HomeCraft Software P.O. Box 974 Tualatin, OR 97062 U.S.A. (503) 692-3732 Site License Price List The following include one diskette and one copy of the documentation. These may be copied for the number of machines contracted for. (Prices are based on one registered copy already have been purchased). 2 to 5 computers at $25@: # of computers: ____ X $25 = _____ 6 to 10 computers at $20@: # of computers: ____ X $20 = _____ 11 to 20 computers at $16@: # of computers: ____ X $16 = _____ 21 to 50 computers at $12@: # of computers: ____ X $12 = _____ 51 or more computers $975 one time fee: ______ Additional manuals are available for $15 each: ______ Subtotal >>>>>> ______ Add $4.00 for S&H, Shipping >>>>>> ______ ($5.00 for Canada or $8.00 outside No. America) TOTAL ORDER >>> ______ Diskette format (choose one) [] 3-1/2" [] 5-1/4" Terms: ALL LICENSES ARE PREPAID ONLY. Master card, VISA, checks or money orders drawn in U.S. dollars drawn on a U.S. bank are accepted. Corporate purchase orders (Net 30 days) accepted. Please make checks and money orders payable to HomeCraft. I N D E X ASCII file, 15 Alphabetical searches, 14, 28, 29 Asterisks, 66 Backing up, 5, 54 Browsing, 13, 25 CONFIG.SYS file, 8 Catalogs, Changing Names, 16 Catalogs, Setting Name, 16 Catalog format, Copying,44 Catalog Format, Indexing, 18 Catalog Format, Line TGL, 43 Catalog Format, Line Titles, 17, 42 Catalog Format, Modifying, 17 Catalog Format, Setting Up, 17 Catalog Format, Totals, 18 Catalog line lenghts, changing, 64 Clearing the screen, 21 Column headings, 50 Continuous Paper, 15 Copy previous entry, 23 Copy last entry, 24 Copy a single line, 24 Copy entries, 33 Cross referencing, 29 DOS prompt, 70 DOS, using, 70 Dashed line, 50 Data files, existing, 2 Database, definition, 2 dBase file, importing, 36 Delete key, 21 Deleted entries, finding, 31 Deleted entries, eliminate, 41 Directory, definition, 3 Directories, 70 Editing Entries, 12 Edit menu, 25 Edit menu, select number, 25 Edit menu, page backward, 25 Edit menu, page forward, 25 Edit menu, undelete entry, 26 Edit menu, remove memo, 26 Edit menu, save changes, 26 Entry number, 20 Erase screen, 24 Exit menu, 54 F1 key, 25 F2 Key, 25, 33 F3 key, 24 F6 key, 29 F7 key, 24 Filenames, 67, 72 Find deleted entries, 31 Floppy disk, definition, 2 Fragmented files, 40, 54 Global search, 31 Hard disk, definition, 2 INSTALL.EXE, 6 Indexing, 18, 43 Insert key, 21 Installation, 6 Installation, floppy disk,7 Installation, hard disk, 6 LHA.EXE, 55 Line Titles, 17 Line TGL, 43 List entries, 27 Macros, 45 Main Screen, 10, 20 Make new entries, saving, 23 mb, definition, 3 Memos, 22 Memo, removing (erasing), 26 Menus, Using the, 10 New Entries, Making, 11 New Entries, Saving, 12 New catalog format, set up, 42 OYC.EXE, 9 Other software, 61 Page backward, 25 Page forward, 25 Page length, 50 Permission denied error, 64 PgDn key, 22 Printed Reports, 15 Quick View, 15 RESET.EXE, 65 Reindex, 37 Report menu, 48 Report menu, send to, 48 Report menu, dashed line, 50 Report menu, column headings, 50 Report menu, page length, 50 Report menu, set up format, 51 Report format, set up, 51 Reports, printing, 53 Reserve space, 40 Saving entries, 23 Screen print feature, 33 Screen colors, 47 Searching, 13 Search menu, 27 Search menu, list entries, 27 Search menu, alphabetically, 28 Search menu, sequential, 28 Search menu, global search, 31 Search menu, set starting point, 31 Search menu, case setting, 32 Search menu, save changes, 32 Search again, 33 Security code, 46 Sequential Searches, 14, 28 Site licenses, 76 Sorting, 38 System requirements, 4 Technical support, 4 Total Values, 18, 33 Undelete entry, 26 Using this manual, 3 Utilities, 16 Utilities menu, 33 Utility menu, copy feature, 33 Utilities menu, reindex, 37 Utilities menu, sort, 38 Utilities menu, reserve space, 40